Industry Standards Reflected in This Product
CE European Community Marking
The IBM 8265 Nways ATM Switch is designed according to the specifications of the
following industry standards as understood and interpreted by IBM as of October
1992.
International Organization for Standardization (ISO)
•
ISO 8802/1
•
ISO 8802/3
•
ISO 8802/5
IEEE (Institute of Electrical and Electronic Engineers)
•
802.1 Local area network (LAN) management and Internet working
•
802.3 Carrier sense multiple access and collision detection
•
802.5 Token passing ring
ANSI (American National Standard Institute)
The IBM Fiber Distribution Data Interface (FDDI) network is an implementation of the
American National Standards Institute (ANSI) X3T9.5 family of standards.
The IBM base standards for the implementation of the FDDI are:
•
ANSI X3.166-1990, FDDI physical layer medium-dependent (PMD), ISO 93/4-3
•
ANSI X3.148-1988, FDDI token-ring physical layer protocol (PHY), ISO 93/4-1
•
ANSI X3.139-1987, FDDI token-ring media access control (MAC)
•
ANSI X3.T9, 5/84-49 RFC 1285 FDDI station management (SMI).
ITU-T (International Telecommunications Union - Telecommunication)
The IBM standards for the implementation of ATM are:
•
Q.2110 Service Specific Connection-Oriented Protocol (SSCOP)
•
Q.2130 Service Specific Coordination Function (SSCF)
ATM Forum
The ATM Forum has defined the ATM User-Network Interface Specification V3.0 and
V3.1.
The CE marking has been applied to this product, meaning its compliance to the
following directives:
•
EMC Directive 89/336/EEC and amendment 93/31/EEC
•
Low Voltage Directive
75
Appendix E. Notices