Advertisement
Quick Links
Advertisement
Related Manuals for H-KING Jetstar 800mm EDF PNF
Summary of Contents for H-KING Jetstar 800mm EDF PNF
- Page 1 Instruction Manual...
-
Page 2: Specifications
CONTENTS STATEMENT. FEATURES. SPECIFICATIONS ASSEMBLY INSTRUCTIONS. SET UP AND FLYING INSTRUCTIONS. Statement: !.Please read this manual carefully and follow the instruction of the manual before you use this products; 2.0ur airplane is not a toy, which is only suitable for the experienced RC pilot or under the guidance of an experienced pilot. - Page 3 Features: Thankyou for purchasing this RC airplane from H-King, we hope this high speed "PNF" ducted fan model will bring you endless pleasure and fun whilst flying it. • Made of strong EPO • Plug in wings with strong magnets for fast assembly •...
- Page 4 ASSEMBLY INSTRUCTIONS Step 1: Assembly of the nosewheel. Fit the nosewheel into the nosewheel steering collet with the spring at the back. Ensure the flat on the wire lines up with the M3 x 3mm grub screw in the steering collet. Use a hex wrench to tighten the grub screw.
- Page 5 Step 5. Assembly of the horizontal stabilizers. Slide the horizontal stabilizers onto the joining rod which now has the flat at the top, slide them right up to the fuselage. The stabilizers are held in place with a 2 x 10mm self tapping screw, this screw is screwed in from the top and goes through the joining rod into the plastic plate underneath.
-
Page 6: Recommended Control Throws
We hope you enjoy your H-King Jetstar and if you haven't already tried our other models in the H-King range then we recommend that you take a look at them at www.hobbyking.com. - Page 7 H-KING MADE IN CHINA • .,...