REAR SCREEN WASH/WIPE
2
Rear screen wiper with
timer
With the ignition switched on, turn
the end of stalk 1 to align the symbol
with mark 2.
on, turn the end of stalk 1 to align
the symbol with mark 2.
1
When the stalk is released, it returns
to the rear wipe position.
Rear screen wash/wipe
With the ignition switched
Before using the rear wiper, check
that no transported object obstructs
the travel of the blade.
In frosty weather, make sure that
the wiper blades are not stuck by
ice (to avoid the risk of the motor
overheating).
Keep an eye on the condition of the
blades. Replace the wiper blades as
soon
as
they
begin
efficiency (approximately once a
year).
to
lose
1.87