Renault KlGER Vehicle User Manual
  1. Manuals
  2. Brands
  3. Renault Manuals
  4. Automobile
  5. KlGER
  6. Vehicle user manual

Renault KlGER Vehicle User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Renault KlGER
Vehicle user manual
@RENAULT

Advertisement

Table of Contents
loading

Related Manuals for Renault KlGER

Summary of Contents for Renault KlGER

  • Page 1 Renault KlGER Vehicle user manual @RENAULT...
  • Page 3 Welcome aboard your vehicle This vehicle user manual contains the information necessary: – for you to familiarise yourself with your vehicle, to use it to its best advantage and to benefit fully from the all the functions and the technical developments it incorporates. –...
  • Page 4 EXTERIOR Electric windows 3.11 Windscreen wipers 1.61 Demisting 1.62, 3.6 and Rear view mirrors 1.39 Locking/unlocking the doors 1.10 Key/Remote control Bodywork maintenance 4.10 Lights: operation 1.58 Lights: replacement 5.10 Tyres...
  • Page 5 PASSENGER COMPARTMENT Passenger compartment storage/fit- Adjusting your driving position 1.19 tings 3.16 Rear headrest 3.19 Rear seat 3.20 Front headrest 1.17 Front seats 1.18 Child safety 1.29...
  • Page 6 DRIVER’S POSITION Multimedia screen 3.24 Instrument panel 1.43 Exterior lighting 1.58 Heating/Air conditioning system Key ignition switch Gear lever Steering wheel adjustment 1.42 Engine start/stop button Hand brake...
  • Page 7 DRIVING AIDS ABS (anti-lock braking system) Parking distance control 2.25 ESC (electronic stability control) Braking assistance 2.10 Reversing camera 2.27...
  • Page 8 SAFETY ON BOARD Front airbags 1.22 Seat belts 1.19 Side Airbags 1.28...
  • Page 9 IDENTIFYING A VEHICLE - LABELS Review of a vehicle identification number Engine identification plate Tyre pressure labels...
  • Page 10 THE ENGINE COMPARTMENT (routine maintenance) Brake fluid Windscreen washer fluid Coolant level Engine oil Battery Opening the bonnet...
  • Page 11 BREAKDOWN RECOVERY Puncture Replacing front windscreen wiper blade(s) 5.23 Tools Emergency spare wheel Changing a wheel Replacing headlight bulbs 5.10 Front towing point 5.24 Replacement of the rear lights 5.12 Replacing windscreen wiper blade(s) 5.23 Fuses 5.13...
  • Page 12 0.10...
  • Page 13 Sections Getting to know your vehicle ....... Driving ..............Your comfort ............Maintenance ............Practical advice ............ Technical specifications ........Alphabetical index ..........0.11...
  • Page 14 0.12...

  • Page 15: Table Of Contents

    Section 1: Getting to know your vehicle Keys, radio frequency remote control: general information ....... . Radio frequency remote control:use .

  • Page 16: Keys, Radio Frequency Remote Control: General Information

    KEYS, RADIO FREQUENCY REMOTE CONTROL: general information The remote control unit operating range This varies according to the environ- ment. It is therefore important when handling the remote control to ensure that you do not lock or unlock the ve- hicle by inadvertently pressing the but- tons.

  • Page 17: Radio Frequency Remote Control:use

    RADIO FREQUENCY REMOTE CONTROL: use Locking the doors Press locking button 1. The hazard warning lights and side in- dicator lights flash twice to indicate that the doors have locked. If a door or the tailgate is open or not Driver’s responsibility properly shut, the doors and tailgate when parking or stopping...
  • Page 18 CARD: general information (1/2) The card is used for: Card operating range – locking/unlocking the opening ele- This varies according to the environ- ments (doors, tailgate); ment: take care not to accidentally lock or unlock the vehicle by inadvertently – switching on the vehicle interior light- pressing the buttons on the card.
  • Page 19 CARD: general information (2/2) Advice Avoid leaving the card in hot, cold or humid areas. Do not keep the card in a place where it could be bent or dam- aged accidentally, such as in a back pocket of a garment. Driver’s responsibility when parking or stopping the vehicle...

  • Page 20: "Hands-Free" Card: Use

    “HANDS-FREE” CARD: use (1/4) There are two ways to unlock/lock the vehicle: – the card in “hands-free” mode; – the card in remote control mode. Driver’s responsibility when parking or stopping the vehicle Never leave an animal, Using the card in “hands- child or adult who is not self-suffi- free”...
  • Page 21 “HANDS-FREE” CARD: use (2/4) Remote “Hands-free” locking Special features of the locking system With the card on you, and doors and tailgate closed, move away from the ve- If a door is open or not properly closed, hicle: it will lock automatically once you when you go away, the vehicle will not have left the access zone.
  • Page 22 “HANDS-FREE” CARD: use (3/4) Locking using the card With the doors and boot closed, press button 4. The vehicle will lock. The hazard warning lights and rear indica- tor lights flash twice to indicate that the vehicle is locked. Note: The maximum distance at which the vehicle locks depends on the sur- roundings.
  • Page 23 “HANDS-FREE” CARD: use (4/4) Driver’s responsibility when parking or stopping the vehicle Never leave an animal, child or adult who is not self-suffi- cient alone in your vehicle, even for a short time. They may pose a risk to themselves If, while the engine is running, a door Locking/unlocking only the or to others by starting the engine,...

  • Page 24: Locking And Unlocking The Doors

    LOCKING AND UNLOCKING THE DOORS (1/3) If the remote control or,depending on the vehicle, the card does not work In the below cases, the radio frequency remote control or the card may not work: – card/radio frequency remote control battery worn or run flat, vehicle battery flat etc.
  • Page 25 LOCKING AND UNLOCKING THE DOORS (2/3) Using the key integrated in Vehicles with key/remote From the inside the card control Push in button 5 to lock and lift button 5 to unlock. It is impossible to open the Insert the key 2 into the lock 3 and lock From outside door if 5 is pushed in.
  • Page 26 LOCKING AND UNLOCKING THE DOORS (3/3) Locking the opening elements without the card or the key For example, in the event of a dischar- ged battery or the card or key tempora- rily not working etc. With the engine switched off and a door or tailgate open, press and hold the 6 switch for more than five seconds.

  • Page 27: Automatic Locking Of Doors

    AUTOMATIC LOCKING OF DOORS Activating/deactivating the function With the engine running, press the button 1 for approximately 5 seconds, until you hear a warning beep. If a door is opened or closed, it will automatically lock again when the Operating faults vehicle reaches a speed of 10 km/h (6 mph) If you experience an operating fault (no...

  • Page 28: Opening And Closing The Doors

    OPENING AND CLOSING THE DOORS (1/2) Opening the doors from the Opening from the inside Child safety outside Pull handle 2. If equipped, this feature is to make it im- possible for the rear doors to be opened With the doors unlocked (refer to the from the inside, move lever 3 in the di- information on “Locking/unlocking the rection indicated on each rear door and...
  • Page 29 OPENING AND CLOSING THE DOORS (2/2) Lights-on reminder buzzer If you have left the lights on after switch- ing off the ignition, a warning buzzer will Driver’s responsibility sound when a front door is opened (to when parking or stopping prevent the battery from discharging, the vehicle etc.).

  • Page 30: Engine Immobiliser

    ENGINE IMMOBILISER (Depends on vehicle) Operating faults Any unauthorised work Engine Immobiliser prevents the ve- After the ignition has been switched on, carried out on the engine hicle from being driven by anyone Ò immobiliser (computers, if warning light continues to not in possession of the vehicle’s wiring, etc.) could be dan- flash or remains continuously lit, there...

  • Page 31: Front Headrests

    FRONT HEADREST To raise the headrest To remove the headrest Pull the headrest upwards to the de- Press button 1 and lift the headrest to sired height. release it (tilt the seatback backwards, if necessary). To lower the headrest To refit the headrest Press button 1 and guide the headrest down to the desired height.

  • Page 32: Front Seats

    FRONT SEATS Move forward or backward To tilt the seatback Lift the lever 1 to move the seat forward Lift the knob 3 upward to unlock recliner or backward.Release the lever 1 in de- mechanism.Tilt the seat back to desired sired position of seat and ensure that For safety reasons, carry position and release knob.

  • Page 33: Seat Belts

    SEAT BELTS (1/3) Adjusting your driving position Incorrectly adjusted or (depending on the vehicle) twisted seat belts may – Sit well back in your seat (having cause injuries in the event removed your coat or jacket etc.). of an accident. This is essential to ensure your back Use one seat belt per person, is positioned correctly.
  • Page 34 SEAT BELTS (2/3) Note: an object placed on the passen- ger seat base may activate the warning light in some cases. – No modification may be made to the compo- nent parts of the origi- To fasten Unlocking nally fitted restraint Unwind the belt slowly and smoothly Press the button 4 on buckle 5 and the...
  • Page 35 SEAT BELTS (3/3) Adjusting the second row side seat Adjusting the second row centre belts seat belts (depending on vehicle) Slowly unwind belt 6 and click latch 7 Fasten sliding latch 9 into the red into red buckle 8. In all cases, check buckle 10.

  • Page 36: Methods Of Restraint In Addition To The Front Seat Belts

    METHODS OF RESTRAINT IN ADDITION TO THE FRONT SEAT BELTS (1/6) Depending on the vehicle, they will con- – Have the entire restraint sist of: system checked following – seat belt inertia reel pretensio- an accident. ners; – No operation whatso- –...
  • Page 37 METHODS OF RESTRAINT IN ADDITION TO THE FRONT SEAT BELTS (2/6) Load limiter Airbags for driver and front passenger Above a certain severity of impact, this mechanism is used to limit the force of Fitted to the driver and passenger side. the belt against the body so that it is at The presence of this equipment is in- an acceptable level.
  • Page 38 METHODS OF RESTRAINT IN ADDITION TO THE FRONT SEAT BELTS (3/6) Operating faults å This warning light will light up on the instrument panel when the igni- tion is switched on and then go out after a few seconds. If it does not light up when the ignition is switched on, or comes on when the engine is running, there is a fault in the system.
  • Page 39 METHODS OF RESTRAINT IN ADDITION TO THE FRONT SEAT BELTS (4/6) The following cases cause the pre- In a frontal impact with another vehi- In a side impact with another vehicle tensioners or airbags to operate. cle of an equivalent or higher category, of an equivalent or higher category, at with an impact area equal to or greater an impact speed equal to or greater...
  • Page 40 METHODS OF RESTRAINT IN ADDITION TO THE FRONT SEAT BELTS (5/6) In the following examples, the pre- In the following examples, the pre- – in the event of a side impact, affect- tensioners and airbags could oper- tensioners and airbags might not ing the front of the vehicle;...
  • Page 41 METHODS OF RESTRAINT IN ADDITION TO THE FRONT SEAT BELTS (6/6) All of the warnings below are given so that the air bag is not obstructed in any way when it is inflated and also to prevent the risk of serious injuries caused by items which may be dislodged when the air bag inflates. Warnings concerning the driver’s air bag –...

  • Page 42: Side Protection Devices

    SIDE PROTECTION DEVICES Side Airbags Depending on vehicle, these airbags may be fitted at the sides of the front Depending on the vehicle, a marking on the seat side trims informs you of the seats and are deployed at the sides of presence of additional means of restraint (air bags, pretensioners, etc.) in the the seats (door side) to protect the oc- passenger compartment.

  • Page 43: Child Safety: General Information

    CHILD SAFETY: general information (1/2) Carrying children Children, and adults, must be correctly seated and strapped in for all journeys. The children being carried in your vehi- cle are your responsibility. A child is not a miniature adult. Children are at risk of specific injuries as their muscles and bones have not yet fin- ished growing.
  • Page 44 CHILD SAFETY: general information (2/2) Using a child seat The level of protection offered by the child seat depends on ability to restrain Set a good example by always fas- child and on its installation. Incorrect tening your seat belt and teaching installation risks the protection of the your child: child in the event of harsh braking or an...

  • Page 45: Child Safety: Choosing A Child Seat Mounting

    CHILD SAFETY: CHOOSING A CHILD SEAT MOUNTING (1/3) There are two ways of attaching child Attachment using isofix system Before using an ISOFIX seats: via the seat belt or using the Authorised ISOFIX child seats are ap- child seat that you pur- ISOFIX system.
  • Page 46 CHILD SAFETY: CHOOSING A CHILD SEAT MOUNTING (2/3) The two rings 1 and 2 are located be- Before installing an ISOFIX seat in the Note: if you remove the ISOFIX seat, tween the seatback and the seat base rear at the side, please ensure that remember to take out and reposition of the seat and are identified by a mark- you have retracted the seat belt buckle...
  • Page 47 CHILD SAFETY: CHOOSING A CHILD SEAT MOUNTING (3/3) The ISOFIX anchorage Do not use the child seat points have been exclu- if it may unfasten the seat sively designed for child belt restraining it: the base seats with the ISOFIX of the seat must not rest on system.

  • Page 48: Child Safety : Fitting A Child Seat

    CHILD SAFETY: FITTING A CHILD SEAT:General information Some seats are not suitable for fitting In the rear side seat child seats. The diagram on the follow- A carrycot can be installed across the ing page shows you how to attach a vehicle and will take up at least two child seat.

  • Page 49: Child Seats: Attachment By The Seat Belt

    CHILD SEATS: ATTACHMENT BY THE SEAT BELT (1/2) Child seat attached using the belt ¬ Seat which allows a child seat with “Universal” approval to be attached by a seat belt. ² Seat not suitable for fitting child seats. RISK OF DEATH OR SERIOUS INJURY: before fitting a rear-facing child seat on the front passenger...
  • Page 50 CHILD SEATS: ATTACHMENT BY THE SEAT BELT (2/2) The table below summarises the information already shown in the diagram on the previous pages, to ensure the applicable regu- lations are respected. Seating Position Second row seats Weight of Mass Group Front passenger seat the child LEFT...
  • Page 51 system (1/2) CHILD SEATS: attachment using the ISOFIX The size of the ISOFIX child seat is in- dicated by a letter: – A, B and B1: for forward-facing seats in group 1 (9 to 18 kg); – C and D: shell seat or rear-facing seats in group 0+ (less than 13 kg) or group 1 (9 to 18 kg);...

  • Page 52: Child Seats : Attachment Using The Isofix System

    system (2/2) CHILD SEATS: attachment using the ISOFIX The table below summarises the information already shown on the diagram on the previous page, to ensure the regula- tions in force are respected. Weight of Front passenger Type of child seat Seat size ISOFIX Rear side seats Rear centre seat...

  • Page 53: Mirrors

    MIRRORS Automatic folding door mirrors Depending on the variant, door mirrors will be folded automatically by pressing the switch 4. Exterior rear view mirror 1 Interior rear view mirror 6 (depending on the version) (depending on the version) Automatic adjustment The interior rear-view mirror 6 is manu- ally adjustable.

  • Page 54: Driving Position, Right-Hand Drive

    DRIVING POSITION, RIGHT-HAND DRIVE (1/2) 1.40...
  • Page 55 DRIVING POSITION, RIGHT-HAND DRIVE (2/2) The presence of the equipment DEPENDS ON THE VEHICLE VERSION AND COUNTRY. 1 Left side air vent 11 Steering column stalk for 19 Rear console airvent 2 Location for left tweeter - direction indicator lights; 20 12V Accessories socket 3 Upper Glove Box - exterior lights,...

  • Page 56: Steering Wheel/Power Assisted Steering

    STEERING WHEEL/POWER-ASSISTED STEERING Power Assisted Steering For safety reasons, only With the engine running, do not leave adjust the steering wheel the steering wheel at full lock while sta- when the vehicle is station- tionary as this may damage the power- ary.

  • Page 57: Warning Lights

    WARNING LIGHTS (1/4) The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY. Main beam headlight tell-tale á light. Dipped beam headlight tell- tale. Left-hand direction indicator tell-tale. Right-hand direction indica- tor tell-tale. Gear change indicator ä[ This lights up to advise you to change to a higher gear (up arrow) or lower gear (down arrow).
  • Page 58 WARNING LIGHTS (2/4) The presence and operation of the warning lights DEPEND ON THE EQUIPMENT AND COUNTRY. Warning light malfunction Stop light Ò ® (red or orange) This lights up when the igni- Door(s) open warning light tion or engine is switched on and goes Refer to “Opening/closing the doors”...
  • Page 59 WARNING LIGHTS (3/4) The presence and operation of the warning lights DEPEND ON THE EQUIPMENT AND COUNTRY. Handbrake “on” warning Battery charge warning Over Speed Warning beep Ú light and brake circuit inci- light Primary Warning dent warning light When vehicle speed exceeds around If it comes on when you are driving, it in- 80 km/h (50 mph), a beep sounds for This comes on when the ignition is...
  • Page 60 WARNING LIGHTS (4/4) The presence and operation of the warning lights DEPEND ON THE EQUIPMENT AND COUNTRY. Low fuel level warning light Coolant temperature warn-  Ä Ô Warning light for monitor- ing display This warning light gets ON ing exhaust gas This bar display comes ON when igni- when ignition is ON and remains lit per- tion is ON and remains lit permanently...

  • Page 61: Displays And Indicators

    DISPLAYS AND INDICATORS (1/5) Instrument panel A Rev counter 1 (rpm X1000) Coolant temperature warning display 3 This is applicable depending on the variant. On-board computer 2 Please refer the instructions under "Section 1 under Warning lights chap- It lights up when the ignition is switched Please refer the instructions under ter.' on.
  • Page 62 DISPLAYS AND INDICATORS (2/5) Instrument panel B Driving mode indicator:ECO Gear mode display 11 mode 5 This is applicable depending on the variant. Estimated range with Rev counter 6 remaining fuel 12 It lights up when the ignition is switched on.
  • Page 63 DISPLAYS AND INDICATORS (3/5) Clock 14 Service due reminder display Instantaneous fuel economy Driving mode indicator:Normal mode 15 Average fuel economy 18 1.49...
  • Page 64 DISPLAYS AND INDICATORS (4/5) Display to change the Fuel economy history settings 19 display 20 This display will allows you to custom- ise the brightness of the display in both day and night mode 1.50...
  • Page 65 DISPLAYS AND INDICATORS (5/5) Driving mode indicator: Sport Warning lights indicator 24,25 mode 21 When driving, if multiple tell-tale lights triggered, the lights 24, 25 will rotate for every 4 seconds. Rev counter 22 (rpm X1000) Torque display 26 Air quality indicator 23 Power range display 27 Acceleration display 28 1.51...

  • Page 66: On-Board Computer

    ON-BOARD COMPUTER (1/5) a) Total distance recorder. b) Trip distance recorder. c) Fuel used in litre (from last reset). d) Average fuel consumption (from last reset). e) Current fuel consumption. f) Estimated fuel range (DTE - distance to empty). g) Distance travelled from last reset. h) Average speed from the last Reset.
  • Page 67 ON-BOARD COMPUTER (2/5) Resetting the trip mileage For the first few kilometres after pres- sing the reset key you will notice that To reset the trip mileage recorder, the the range increase/decrease as you display must show the Trip meter func- travel.
  • Page 68 ON-BOARD COMPUTER (3/5) The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY. Interpreting the display selected DISPLAY Total distance recorder Trip distance recorder Fuel used (since the last time the reset button was pressed) Average fuel consumption (since the last time the reset button was pressed) This value is displayed after driving 400 metres.
  • Page 69 ON-BOARD COMPUTER (4/5) The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY. Interpreting the display selected DISPLAY Current fuel consumption Estimated range with remaining fuel Distance travelled (since the last time the reset button was pressed for TRIP B) Average speed (since the last time the reset button was pressed) Time taken to travel the distance 1.55...
  • Page 70 ON-BOARD COMPUTER (5/5) The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY. Interpreting the display selected DISPLAY Mileage before service With the ignition switched on, the engine not running and the display set to “SERVICE INTERVALS”, press the button 1 or 2 for approximately 10 seconds to display the mileage before service (distance or time to the next ser- vice).

  • Page 71: Clock

    CLOCK Display A or B Wait a few seconds, the minutes will flash: repeatedly press or press and To access the display 3 for setting the hold button 1 or 2 to set the time. time, press button 1 (or) 2 and Wait When setting is complete, the hours a few seconds;...

  • Page 73: Headlight Height Adjustment

    HEADLIGHT HEIGHT ADJUSTMENT Position Only Driver Zero Driver + front passenger Zero Driver + Passenger in front seat + Rear seats occupied Driver + Luggage in boot Headlight height Adjustment: Passenger in all seats Knob A is used to adjust height of the headlight beam according to load.Turn control A anticlockwise to lower the Passenger in all seats +...

  • Page 74: Audible And Visual Signals

    AUDIBLE AND VISUAL SIGNALS Horn Hazard warning lights Direction indicators é Press on the centre or sides of the high- Press switch 2. Move stalk 3 parallel to the steering lighted (horn pad) to use the horn. wheel and in the direction you are going This switch activates all four direction to turn it.

  • Page 75: Screen Washer/Wiper

    WINDSCREEN WASHING / WIPING (1/2) Windscreen Wiper With the ignition on, pull the stalk 1 towards you. In frosty weather, make sure that A brief pull will trigger a single sweep the wiper blades are not stuck by ice of the wipers, in addition to the wind- (risk of motor overheating).
  • Page 76 WINDSCREEN WASHING / WIPING (2/2) Rear screen washer/ wiper With the ignition on, turn the end of stalk 1 to align the symbol with mark 2. When the stalk is released, it returns to the rear wipe position. A longer push will trigger three sweeps of the wipers, in addition to the wind screen washer.

  • Page 77: Fuel Tank (Filling With Fuel)

    FUEL TANK (1/2) Fuel filler cap: this is specific to the vehicle type. If you have to replace it, make sure the new cap is of the same type. Contact an approved dealer. It is essential to use unleaded petrol. Using leaded petrol will damage the antipollution system and may lead to a loss of warranty.
  • Page 78 FUEL TANK (2/2) Filling up with fuel Fuel grade – Never place the cap near With the ignition off, insert the nozzle Use a high-grade fuel that complies a source of heat or flame. fully before turning it on to fill the fuel with the legislation in force in each –...
  • Page 79 Section 2: Driving (Advice on use relating to fuel economy and the environment) Running in, Ignition switch ............Starting / Stopping the engine : vehicle with key .

  • Page 80: Running In, Ignition Switch

    RUNNING IN, IGNITION SWITCH Running in Ignition on position M For the first 1,000 km, do not exceed The ignition is switched on: 80 km/h in the highest gear. – the engine may be started. You may only expect top performance from your vehicle after approximately Start position D 3,000 kms.

  • Page 81: Starting/Stopping The Engine - Vehicle With Key

    STARTING/STOPPING THE ENGINE - VEHICLE WITH KEY (1/2) Starting the engine Special note Depending on the vehicle, accessories In cold condition: switch on the ignition (e.g. radio) stop working either when for several seconds before starting the the engine is switched off or when the engine, so that it is easier to start the doors are locked.
  • Page 82 STARTING/STOPPING THE ENGINE - VEHICLE WITH KEY (2/2) Starting problems Operating faults such as: – faulty ignition, running out of fuel or To avoid damage , do not keep trying disconnected spark plugs resulting to start the engine (by pushing or towing in the engine misfiring or cutting out the vehicle) without having identified when driving.
  • Page 83 STARTING/STOPPING THE ENGINE - VEHICLE WITH CARD (1/3) Starting with tail gate open in hands-free mode. In this case, hands free card must not be located in the luggage compartment. The card must be in detection zone 1. Special features To start: –...
  • Page 84 STARTING/STOPPING THE ENGINE - VEHICLE WITH CARD (2/3) Press the brake or clutch pedal, then place the hands free card in contact with position 3 inside the centre con- sole (depending on variants, slide the console door to access the position 3) around 2 seconds.
  • Page 85 STARTING/STOPPING THE ENGINE - VEHICLE WITH CARD (3/3) If the card is no longer in the pas- Do not park the vehicle or senger compartment when you try to run the engine in locations switch the engine off, the message where combustible sub- “PRESS HOLD START”...

  • Page 86: Gear Lever, Hand Brake

    GEAR LEVER, HAND BRAKE An impact to the under- side of the vehicle while manoeuvring (e.g.: stri- king a post, raised kerb or other street furniture) may result in damage to the vehicle (e.g.: defor- mation of an axle).To prevent any risk of accident, have your vehicle checked by an approved dealer.

  • Page 87: Special Features Of Petrol Versions

    SPECIAL FEATURES OF PETROL VERSIONS The following operating conditions: If you notice any of the above operating faults, have the necessary repairs car- – driving for long periods when the low ried out as soon as possible by an ap- fuel level warning light is lit;...

  • Page 88: Driver Correction Devices/Aids

    DRIVER CORRECTION DEVICES/AIDS (1/3) ABS (anti-lock braking Depending on the vehicle, this is com- posed of: system) – the (anti-lock braking Under heavy braking, the ABS prevents system); the wheels from locking, allowing the In an emergency, apply firm and stopping distance to be managed and –...
  • Page 89 DRIVER CORRECTION DEVICES/AIDS (2/3) Emergency brake assist with Operating faults electronic brake distribution   – If the warning light on the in- (depending on the vehicle) strument panel comes on while you This system supplements the ABS are driving, the brakes will still and helps reduce vehicle stopping dis- work normally without ABS;...
  • Page 90 DRIVER CORRECTION DEVICES/AIDS (3/3) Deactivating the ESC Understeer control Operating principle function This system optimises the action of the A sensor in the steering wheel detects ESC in the case of pronounced under- the direction selected by the driver. In some situations (driving on very wet steering (loss of front axle road hold- ground: snow, mud, etc.

  • Page 91: Driving Advice, Eco Driving

    DRIVING ADVICE, ECO DRIVING (1/3) Fuel consumption is accredited in ac- Activating the function cordance with a standard regulatory  method. Identical for all manufactur- Press switch 1. The warning light ers, this enables vehicles to be com- goes out on the instrument panel to pared with one another.
  • Page 92 DRIVING ADVICE, ECO DRIVING (2/3) – Do not overrev the engine in the in- termediate gears. – You should always use the highest gear possible. – Avoid sudden acceleration. – Brake as little as possible. If you an- ticipate an obstacle or bend in ad- vance, you may then simply release the accelerator pedal.
  • Page 93 DRIVING ADVICE, ECO DRIVING (3/3) – In vehicles fitted with air condi- tioning, it is normal to observe an increase in fuel consumption (es- pecially in urban conditions) when it is used. For vehicles fitted with manual air conditioning, switch off the system when it is not required.

  • Page 94: Maintenance And Antipollution Advice

    MAINTENANCE AND ANTIPOLLUTION ADVICE Your vehicle complies with criteria for In addition, replacing engine, fuel – Air filter, fuel filter: a choked ele- recycling and recovering vehicles at the supply system and exhaust compo- ment will reduce efficiency. It must end of their service life, which entered nents with parts other than those origi- be replaced.

  • Page 95: Environment

    ENVIRONMENT Emissions Recycling Your vehicle has been designed with respect for the environment in mind for For the usage phase, your vehicle was Your vehicle is 85% recyclable and its entire service life: during production, designed to emit fewer greenhouse 95% recoverable.

  • Page 96: Automated Manual Transmission

    AUTOMATED MANUAL TRANSMISSION (1/4) Gear Shifter 1 Gear shift pattern Instrument panel Display This allows you to engage forward (see the marking on the lever) 2 : automatic mode. gear, reverse and neutral. +: Manually moving up a gear 3 : brake pedal press indicator light. –: Manually moving down a gear 4 : current gear display.
  • Page 97 AUTOMATED MANUAL TRANSMISSION (2/4) Operation Reverse gear (from neutral, with the vehicle stationary) Switch on the ignition. The display on the instrument panel With the brake pedal pressed, posi- switches on. tion the selector lever to R. The letter R If neutral (N) is displayed, start the appears on the display.
  • Page 98 AUTOMATED MANUAL TRANSMISSION (3/4) Creeping Driving in manual mode The vehicle will move off again: – either slowly, if you release the brake It is a function that enables the vehicle This mode can be activated at any time without accelerating (e.g. when in a to move slowly without pressing accel- when driving by pushing the lever to po- traffic jam),...
  • Page 99 AUTOMATED MANUAL TRANSMISSION (4/4) Driving in automatic mode Accelerating and overtaking If the engine is being overrevved or underevved, the system will select Each time the ignition is switched on, – slowly press the accelerator pedal to the optimal gear. starting in neutral, shift the lever to D accelerate gradually, When stopped at traffic lights, with the...

  • Page 100: Continuously Variable Transmission

    CONTINUOUSLY VARIABLE TRANSMISSION (1/3) Creeping It is a function that enables the vehicle to move slowly without pressing accel- erator pedal.Follow the steps: – Start the engine as instructed in ‘Starting’section.. – With brake pedal pressed, shift the lever to D position. –...
  • Page 101 CONTINUOUSLY VARIABLE TRANSMISSION (2/3) Driving in automatic mode Special circumstances Special cases Under certain driving conditions (eg. Select position D. In the majority of – If the bends and road surface do engine protection, or electronic stabil- traffic conditions, you will not have to not allow you to stay in automatic ity program (ESP) operational etc.) the touch the gear selector lever again: the...
  • Page 102 CONTINUOUSLY VARIABLE TRANSMISSION (3/3) Parking the vehicle Operating faults When the vehicle is stopped, move the When setting off, if the lever is locked lever to position P while keeping your in position P even though you are de- foot on the brake pedal: the gearbox is pressing the brake pedal, the lever can in neutral and the drive wheels are me- be released manually.

  • Page 103: Parking Distance Control

    PARKING DISTANCE CONTROL (1/2) Operating principle Ultrasonic sensors, fitted in the vehi- cle’s rear bumper, measure the dis- tance between the vehicle and an ob- stacle when reversing. This measurement is indicated by beeps which become more frequent the closer you come to the obstacle, until they become a continuous beep when the vehicle is approximately 35 centi- metres from the obstacle.
  • Page 104 PARKING DISTANCE CONTROL (2/2) Operating faults This function is an addi- When the system detects an operating tional aid that uses sound fault, there will be a three-second con- to indicate the distance tinuous beep as a warning. Please con- between the vehicle and sult an authorised dealer.

  • Page 105: Reversing Camera

    REVERSING CAMERA (1/2) Operation Note: make sure that the reversing This function is an addi- camera is not obscured (by dirt, mud, Depending on the variants,when tional aid. It cannot, there- snow, etc.). using reverse gear, the camera 1 fore, under any circum- sends a view of the area behind the stances replace the vigi- vehicle to the multimedia display 2 to-...
  • Page 106 REVERSING CAMERA (2/2) This gauge 3 remains fixed and indi- cates the vehicle trajectory if the wheels are in line with the vehicle. Static guide line 3: The static guide line 3 has coloured markers A, B and C showing the dis- The screen shows a reverse image.
  • Page 107 Section 3: Your comfort Multi-sense ..............Air vents, air outlets .

  • Page 108: Multi-Sense

    MULTI-SENSE “Eco” mode The “MULTI-SENSE” system enables a choice between three driving modes “Eco” mode focuses on energy saving. that can be used to control driving, The steering is smooth, engine and vehicle engine performance, steering gearbox management enable fuel con- effort (depending on the vehicle): sumption to be reduced.

  • Page 109: Air Vents, Air Outlets

    AIR VENTS, air outlets (1/2) 1 Left side air vents 2 Windscreen demisting vents 3 Centre air vents 4 Right side vents 5 Control panel 6 Driver footwell outlets 7 Rear console air vents 8 Front passenger footwell outlets...
  • Page 110 AIR VENTS, air outlets (2/2) Air flow Centre Air Vents Rear console Air Vents (depends on the vehicle) (depends on the vehicle) Lateral Air vents(Left and Right) – To move the front vanes up/down, – To move the front vanes up/down, –...

  • Page 111: Heating, Ventilation, Air Conditioning

    HEATING, VENTILATION, AIR CONDITIONING (1/2) Adjusting the ventilation fan speed. Turn control 2 from 0 to 4. The further to the right it is positioned, the more air is blown into the passenger compart- ment. If you want to shut off the flow of air completely and stop the system, set control 2 to 0.
  • Page 112 HEATING, VENTILATION, AIR CONDITIONING (2/2) Switching passenger Rapid demisting Air recirculation is used to: compartment isolation mode/ – to isolate the passenger compart- – Turn control 4 on full hot position. air recirculation mode on. ment from the external atmosphere. –...

  • Page 113: Automatic Climatic Control

    AUTOMATIC CLIMATE CONTROL (1/3) Varying the ventilation speed In automatic mode, the system uses the most suitable amount of air to reach and maintain the desired comfort level. You can still adjust the ventilation speed by turning control 1 to increase or reduce the ventilation speed.
  • Page 114 AUTOMATIC CLIMATE CONTROL (2/3) Switching air conditioning on Front screen de-icing/ Adjusting the distribution or off demisting of air in the passenger compartment In automatic mode, the system switches Press button 2 – the integrated indica- the air conditioning system on or off, tor light comes on.
  • Page 115 AUTOMATIC CLIMATE CONTROL (3/3) Air recirculation (isolation of Manual use the passenger compartment) Press button 5 – the integrated indica-  tor light comes on. Prolonged use of this position may lead This function is managed automatically to odours, caused by non-renewal of (operation is confirmed by a warning air, and the formation of condensation light on button 5), but you can also acti-...

  • Page 116: Air Conditioning: Information And Advice On Use

    AIR CONDITIONING: information and advice on use Fuel consumption Operating faults You will normally notice an increase in As a general rule, contact your ap- fuel consumption (especially when driv- proved dealer in the event of an oper- ing in town) when the air conditioning is ating fault.

  • Page 117: Windows

    WINDOWS (1/2) Electric window Electric window Manual window winders Press/pull the switch to raise/lower the Depending on the variants, use 6 to Depending on the variants, turn windows to the desired height (the rear raise/lower the rear passenger win- handle 7 to lower or raise the window to windows do not open fully).
  • Page 118 WINDOWS (2/2) One-touch mode Depending on the vehicle, this mode works in addition to the operation of the electric windows described previously. It is only fitted to the driver’s window. The system functions with the igni- Briefly press or pull switch 1 fully: the tion off until one of the front doors window is fully lowered or raised.

  • Page 119: Interior Lighting

    INTERIOR LIGHTING (1/2) Front Courtesy light Front Map reading light This feature depends on the vehicle This feature depends on the vehicle version. version. Press switch 1 to position Pressing switch 2 provides: – A for switching OFF the light. –...
  • Page 120 INTERIOR LIGHTING (2/2) Interior ambient light Rear Courtesy light This feature depends on the vehicle This feature depends on the vehicle version. version. Pressing switch 3 will activate/deacti- Press switch 4 to position vate the interior ambient lighting. This – A for switching OFF the light. will activate the lighting in door trims –...

  • Page 121: Sun Visor/Grab Handle

    SUN VISOR/GRAB HANDLE Front sun visor Grab handle 3 Lower the sun visor 1 over the wind- This offers support and can be held screen or unclip it and turn it over the when the vehicle is being driven, Do side window.

  • Page 122: Passenger Compartment Storage

    PASSENGER COMPARTMENT STORAGE (1/2) Upper Glove Box Cooled Glovebox Centre console - Front storage area 4 Depending on variant, Press 1 to open Depending on the variant, opening/ the upper glove box. closing the valve 3 along the arrow di- rection will enable/disable the cooling Centre console - Rear inside glove box..
  • Page 123 PASSENGER COMPARTMENT STORAGE (2/2) Front door storage 6 Rear door storage 7 Front seat storage 8 They can hold 1litre bottle. They can hold 1litre bottle. Depending on variants, front seat stor- age available behind the front seat backrest. Ensure that no hard, heavy or pointed objects are Nothing should be placed placed in the “open”...

  • Page 124: Accessories Socket

    ACCESSORIES SOCKET Accessories socket 1,2 It is provided for connecting accesso- ries approved by our technical depart- Connect accessories with ment. a maximum power of 120 watts (12 V) only. When several accessory sockets are used at the same time, the total power of the connected accessories must not exceed 180 watts.

  • Page 125: Rear Headrest

    REAR HEADRESTS To remove the headrests A or B Raise the headrest as far as it will go, then press button 1 and remove the headrest. To adjust the height of the headrest A (depending on vehicle) Press the button 1 and simultaneously slide the headrest to the desired height.
  • Page 126 REAR SEATS When refitting the seat- back, make sure it is cor- rectly locked in place. If seat covers are fitted, make sure these do not prevent the seatback latch from locking in. Make sure that the seat belts are positioned correctly.

  • Page 127: Boot

    BOOT Opening the tail gate manually f rom the inside If it is impossible to unlock the tailgate from outside, it can be done manually from inside; - access the luggage compartment by tilting the rear bench seatback(s); - insert a pencil or similar object in recess 1 and slide the unit as shown in the illustration;...
  • Page 128 REAR PARCEL SHELF Rear Parcel shelf 2 – Lift the parcel shelf 2 to certain height in the direction A; (depending on the vehicle) – Incline the parcel shelf 2 along the di- – Unhook the two straps 1 of the trunk rection B to certain angle and pull to door;...

  • Page 129: Longitudinal Roof Bars

    LONGITUDINAL ROOF BARS Depending on the vehicle, if fitted, you Depending on the vehicle, it is equipped can transport luggage or additional with longitudinal style roof bars 2.These For information on the range of equipment (bike racks, ski racks, etc): roof bars are meant only for aesthetic equipment adapted to your ve- purpose and do not carry any load.

  • Page 130: Multimedia Equipment

    MULTIMEDIA EQUIPMENT If your vehicle is not fitted with an audio system, one can be fitted and locations have been provided for the radio 1. To install any equipment, please con- sult an authorised dealer. Refer Multimedia manual for more de- tails.
  • Page 131 Section 4: Maintenance Bonnet ............... . Engine Oil - Topping up, filling .

  • Page 132: Bonnet

    BONNET In the event of even a slight impact involving the radia- tor grille or bonnet, have the bonnet lock checked by an approved Dealer as soon as pos- sible. When working in the engine compartment, ensure that the windscreen wiper stalk is in the park position.

  • Page 133: Engine Oil - Topping Up, Filling

    ENGINE OIL LEVEL: topping up, filling (1/3) It is normal for an engine to use oil for Once the operation has been com- lubrication and cooling of moving parts pleted, ensure that the dipstick is guided and it is normal to top up the level be- in as far as it will go or that the “cap- tween oil changes.
  • Page 134 ENGINE OIL LEVEL: topping up, filling (2/3) – Unscrew cap 1. – top up the level (as a guide, the ca- pacity between the minimum and maximum reading on the dipstick 2 is approximately 0.85 litres,(depending on the engine). – wait for approximately 20 minutes to allow the oil to flow into the engine.
  • Page 135 ENGINE OIL LEVEL: topping up, filling (3/3) Oil change Service interval: refer Maintenance Document for your vehi- cle. Oil change capacity Please refer to the maintenance docu- ment for your vehicle, or contact an au- thorised dealer. Always check the engine oil level using Exceeding the maximum the dipstick, as explained previously (it engine oil level...

  • Page 136: Levels

    LEVELS (1/2) Level 1 It is normal for the level to drop as the brake shoes become worn, but it must never drop lower than the “MIN” warn- ing line shown on brake fluid reservoir. If you wish to check the disc and drum wear yourself, you should obtain the document explaining the checking pro- cedure from the approved dealer net-...

  • Page 137: Filters

    LEVELS (2/2) / FILTERS Filters Checking intervals Check the coolant level regularly The replacement of filter elements (very severe damage is likely to be (air filter, cabin filter, fuel filter, etc.) is caused to the engine if it runs out of scheduled in the maintenance opera- coolant).

  • Page 138: Battery

    BATTERY The charge status of your battery can decrease especially if you use your ve- hicle: – for short journeys. – for driving in town. – when the temperature drops. – after extended use of consumers (radio etc.) with the engine switched off;...

  • Page 139: Tyre Pressure

    TYRE PRESSURE Adhere to the tyre pressures (including the emergency spare wheel). The tyre pressures should be checked at least once a month and additionally before any long journey. Tyre pressures should always be checked when the tyres are cold, ignore higher pressures which may be reached in hot weather or following a fast journey.

  • Page 140: Bodywork Maintenance

    BODYWORK MAINTENANCE (1/3) You should A well-maintained vehicle will last Respect local regulations about wash- longer. It is therefore recommended to ing vehicles (e.g. do not wash your ve- Wash your car frequently, with the maintain the exterior of the vehicle reg- hicle on a public highway).
  • Page 141 BODYWORK MAINTENANCE (2/3) What you should not do Wash the vehicle in bright sunlight or Degrease or clean using freezing temperatures. high-pressure cleaning Do not scrape off mud or dirt without equipment or by spray- pre-wetting. ing on products not ap- Allow dirt to accumulate on the exterior.
  • Page 142 BODYWORK MAINTENANCE (3/3) Vehicles with a matte paint Using a roller type car wash Cleaning the headlights, finish sensors and cameras Return the wiper stalk to the park po- sition.Check mounting This type of paint requires certain pre- Use a soft cloth or cotton wool. If this external accessories, additional lights cautions.

  • Page 143: Interior Trim Maintenance

    INTERIOR TRIM MAINTENANCE (1/2) instrument panel Textiles (seats, door trim, etc) A well-maintained vehicle will last longer. It is therefore recommended to (e.g. instrument panel, clock, exterior Vacuum-clean the textiles regularly. maintain the interior of the vehicle regu- temperature display, radio display, etc.) larly.
  • Page 144 INTERIOR TRIM MAINTENANCE (2/2) Removal/replacing removable You should not: equipment originally fitted in You are strongly advised not to po- the vehicle sition objects such as deodorants, Use high-pressure clean- scents, etc. near air vents, as this could If you need to remove equipment in ing equipment or sprays damage your dashboard trim.
  • Page 145 Section 5: Practical advice Puncture, emergency spare wheel ..........Wheel trim, tools .

  • Page 146: Puncture, Emergency Spare Wheel

    PUNCTURE, EMERGENCY SPARE (1/2) Spare Wheel To store the wheel in the storage location: The spare wheel is located in the lug- gage compartment. Repeat the steps in the reverse order to fit back the spare wheel in the same To access it : location.
  • Page 147 PUNCTURE, EMERGENCY SPARE (2/2) Note: ensure that the emergency spare wheel or punctured wheel are correctly positioned.Check that the boot carpet is correctly positioned in its bump stops to prevent it from being damaged. If the emergency spare wheel has been stored for several years, have it checked by your Dealer to ensure that it is safe to use.

  • Page 148: Wheel Trim, Tools

    WHEEL TRIM, TOOLS Never leave tools unse- cured in the vehicle: there is a risk that they may be thrown about during brak- ing. After use, make sure the tools are correctly positioned in their housings: there is a risk of injury. The jack is designed for wheel changing purposes only.

  • Page 149: Changing A Wheel

    CHANGING A WHEEL (1/2) Switch on the hazard warn- ing lights.Keep the vehicle away from traffic and on a level surface where it will not slip (if necessary, place a solid support under the jack base).Apply the parking brake and engage a Removing the Wheel Place the jack under the body ,and gear (first or reverse).
  • Page 150 CHANGING A WHEEL (2/2) Refitting the Carwheel Using the wrench, tighten the bolts If the vehicle is parked on evenly. Uncrank (release) the jack using By aligning one of the hole in the wheels the hard shoulder, you must wheel wrench till the jack becomes free to the hole in the wheel drum/disc.

  • Page 151: Tyres

    TYRES (1/3) The tyres are the only contact between When the tread has worn down to the the vehicle and the road, so it is essen- wear warning strips, these strips will tial to keep them in good condition. become visible 2: it is then necessary You must make sure that your tyres to replace your tyres because the tread conform to local road traffic regulations.
  • Page 152 TYRES (2/3) Tyre pressures The pressures should be checked cold: ignore higher pressures which may be Adhere to the tyre pressures (including reached in hot weather or following a the emergency spare wheel). The tyre high speed journey. pressures should be checked at least If the tyre pressures cannot be checked once a month and additionally before when the tyres are cold, increase the...
  • Page 153 TYRES (3/3) Use in winter Studded tyres Fitting new tyres This type of equipment may only be Chains For safety reasons, this op- used for a limited period and as laid For safety reasons, fitting snow eration must be carried out down by local legislation.
  • Page 154 FRONT LIGHTS-CHANGING BULBS The headlamps can be replaced. However, we recommend you to have them replaced with an ap- proved dealer,if it proves difficult. To comply with legislation, or as a precaution, you can obtain an emergency kit containing a set of spare bulbs and fuses from an approved dealer.

  • Page 155: Interior Lighting - Changing The Bulbs

    INTERIOR LIGHTING: changing bulbs Front lights 1 Rear lights 2 Please consult an authorised dealer. Please consult an authorised dealer. 5.11...
  • Page 156 EXTERIOR LIGHTS: changing bulbs Rear lighting 1 (Brake lights/ Direction indicator lights / direction LED daytime running lights 2 indicator lights/Reversing Please consult an authorised dealer. lights) Please consult an authorised dealer. The bulbs are under pres- sure and can break when replaced.

  • Page 157: Fuses

    FUSES (1/4) Removing the fuses Remove the fuse, located at the back of flap A from its position To remove the fuse, slide the fuse. It is not advisable to use the free fuse locations. Passenger compartment fuses A If any electrical component does not work, check the condition of the fuses.
  • Page 158 Allocation of fuses in the passenger compartment (presence of some fuses DEPENDS ON VEHICLE EQUIPMENT LEVEL)
  • Page 159 Number Allocation Number Allocation Number Allocation Not used Cluster Defogger Day light running light / Combination switch Ambient lighting Anti-pinch Radio/Ultra low cost Continuous variable navigation/BIA/Diagnostic Child safety transmission socket Not used Power window - Front and Combination switch Rear Child safety Rear power window Horn...
  • Page 160 Number Allocation Number Allocation Fuel pump relay coil/BCM/ First row accessory socket ECU/Powertrain control unit/Gear shift lever/ Cluster Position lamp Electronic power steering Right hand side low beam Airbag headlamp Stop lamp Left hand side low beam Transponder/Clutch travel headlamp end switch/stop lamp/ABS Right hand side high beam Second row accessory...

  • Page 161: Battery: Troubleshooting

    BATTERY: troubleshooting (1/2) To avoid all risk of sparks: Connecting a battery charger – Ensure that all electrical equipments The battery charger must be com- (courtesy lights, etc.) are switched patible with a battery with nominal off before disconnecting or recon- voltage of 12 volts.
  • Page 162 BATTERY: troubleshooting (2/2) Starting the vehicle using the battery from another vehicle If you have to use the battery from an- other vehicle to start, obtain suitable jump leads (with a large cross section) from an approved dealer or, if you al- ready have jump leads, ensure that they are in perfect condition.

  • Page 163: Radio Frequency Remote Control: Batteries

    RADIO FREQUENCY REMOTE CONTROL: batteries (1/2) Operating faults If the battery is too weak to ensure cor- rect operation, you can still start and lock/unlock the vehicle (please refer to the information on “Locking/unlocking the opening elements” in Section 1). Replacing the battery Open the case at slot 1 using a flatblade screwdriver or similar, and replace the...
  • Page 164 RADIO FREQUENCY REMOTE CONTROL: batteries (2/2) Precautions relating to batteries: – keep (new or used) bat- teries out of reach of chil- dren; – do not swallow batteries; Risk of chemical burns which may prove fatal. – if ingested or inserted into any part of the body, consult a doctor as soon as possible.

  • Page 165: Hands Free Card:battery

    HANDS FREE CARD:BATTERY (1/2) Replacing the battery When refitting, proceed in the reverse Operating faults order, then press one of the buttons on If the battery is too weak to ensure cor- When the message “Keycard Battery the card four times, close to the vehicle: rect operation, you can still start and Low”...
  • Page 166 HANDS FREE CARD:BATTERY (2/2) When replacing: Precautions relating to batteries: – make sure that the batter- ies are correctly inserted. – keep (new or used) bat- teries out of reach of chil- Risk of explosion. dren; – if the flap does not close correctly, –...

  • Page 167: Windscreen Wiper - Lift/Replace Wiper Blades

    WINDSCREEN WIPER - TO LIFT/REPLACE WIPER BLADES Check the condition of the wiper blades. You are responsible for their service life: – clean the blades, windscreen and rear screen regularly with soapy water; – do not use them when the wind- screen or rear screen are dry;...

  • Page 168: Towing

    TOWING Before towing, unlock the steering Do not remove the key from column. Press clutch and shift the gear the ignition when the vehi- lever to 1st gear (N/R in automatic cle is being towed. transmission vehicle). Insert the Hands free card into the card reader, press When engine...

  • Page 169: Accessories

    ACCESSORIES Electrical and electronic accessories Before installing this type of accessory, make sure it is compatible with your vehicle. You can get advice from an au- thorised dealer. Connect accessories with a maximum power of 120 watts only. Fire hazard. No work may be carried out on the vehicle’s electrical or radio circuits, except by authorised dealers: an incorrectly connected system may result in damage being caused to the electrical equipment and/or the components connected to it.

  • Page 170: Operating Faults

    OPERATING FAULTS (1/3) The following advice will enable you to carry out quick, temporary repairs. For safety reasons you should always contact an approved dealer as soon as possible. The starter is activated POSSIBLE CAUSES WHAT TO DO Warning lights dim or fail to come on; Battery terminals disconnected, Retighten them, reconnect them or clean the starter does not run.
  • Page 171 OPERATING FAULTS (2/3) On the road POSSIBLE CAUSES WHAT TO DO Vibrations. Tyres not inflated to correct pres- Check the tyre pressures; if this is not the cause, have sures, incorrectly balanced or their condition checked by an approved dealer. damaged.
  • Page 172 OPERATING FAULTS (3/3) On the road POSSIBLE CAUSES WHAT TO DO The engine overheats. The coolant Engine cooling fan not working. Stop the vehicle,switch off the engine and con- temperature indicator light comes tact an approved dealer. Coolant leaks. Stop the vehicle, switch off the engine and check the coolant reservoir: it should contain fluid.
  • Page 173 Section 6: Technical specifications Vehicle Identification plates ............Engine Identification plates .
  • Page 174 VEHCLE IDENTIFICATION PLATES The information shown on the vehicle Depending on the vehicle, Vehicle iden- Depending on the vehicle, Vehicle iden- identification plate should be quoted on tification number A is located at the tification number A is located at the all correspondence or orders.

  • Page 175: Engine Identification Plates

    ENGINE IDENTIFICATION PLATES Engine identification plate A Please quote the information on the engine plate or label A in all corre- Identification number spondence or orders. (Location varies depending on engine) 1 Engine type. 2 Engine suffix. 3 Engine number.

  • Page 176: Engine Specifications

    ENGINE SPECIFICATIONS Versions 1.0 12V 1.0 12V Engine type BR10DE / B4D HR10DET / H4Dt (see engine plate) Cubic capacity (cc) Petrol. Type of fuel octane rating The use of unleaded petrol is essential. It is preferable to use fuel with octane rating 91 and higher. Only use spark plugs specified for your vehicle’s engine.

  • Page 177: Dimensions

    DIMENSIONS (in metres) 0.806 2.500 0.685 1.536 3.991 1.912 1.573(*) 1.605(**) 1.535 (*) unladen - with Roof rail (**) unladen - with Shark antena...

  • Page 178: Weights

    WEIGHTS (in kg) The weights indicated for a basic vehicle without options: they vary depending on the your vehicle’s equipment. Consult your approved Dealer. Minimum Weight - Unladen condition 910 Kg (Depending on vehicle) Maximum Weight - Unladen condition 1036 Kg (Depending on vehicle) Maximum Weight - Laden condition 1461 Kg...

  • Page 179: Replacement Parts And Repairs

    REPLACEMENT PARTS AND REPAIRS Original parts are based on strict specifications and are subject to highly specialized tests. Therefore, they are of atleast the same level of quality as the parts fitted originally. If you fit genuine replacement parts always to your vehicle, it will perform well. Furthermore, repairs carried out within manufactur- ers network using original parts are guaranteed according to the conditions set out on the reverse of repair order.

  • Page 180: Service Sheets

    SERVICE SHEETS (1/6) VIN: .................. Date: Miles (Km): Invoice number: Comments/miscellaneous Type of operation: Stamp Service □ ........□ Anti-corrosion check: OK □ Not OK* □ *See specific page Date: Miles (Km): Invoice number: Comments/miscellaneous Type of operation: Stamp Service □...
  • Page 181 SERVICE SHEETS (2/6) VIN: .................. Date: Miles (Km): Invoice number: Comments/miscellaneous Type of operation: Stamp Service □ ........□ Anti-corrosion check: OK □ Not OK* □ *See specific page Date: Miles (Km): Invoice number: Comments/miscellaneous Type of operation: Stamp Service □...
  • Page 182 SERVICE SHEETS (3/6) VIN: .................. Date: Miles (Km): Invoice number: Comments/miscellaneous Type of operation: Stamp Service □ ........□ Anti-corrosion check: OK □ Not OK* □ *See specific page Date: Miles (Km): Invoice number: Comments/miscellaneous Type of operation: Stamp Service □...
  • Page 183 SERVICE SHEETS (4/6) VIN: .................. Date: Miles (Km): Invoice number: Comments/miscellaneous Type of operation: Stamp Service □ ........□ Anti-corrosion check: OK □ Not OK* □ *See specific page Date: Miles (Km): Invoice number: Comments/miscellaneous Type of operation: Stamp Service □...
  • Page 184 SERVICE SHEETS (5/6) VIN: .................. Date: Miles (Km): Invoice number: Comments/miscellaneous Type of operation: Stamp Service □ ........□ Anti-corrosion check: OK □ Not OK* □ *See specific page Date: Miles (Km): Invoice number: Comments/miscellaneous Type of operation: Stamp Service □...
  • Page 185 SERVICE SHEETS (6/6) VIN: .................. Date: Miles (Km): Invoice number: Comments/miscellaneous Type of operation: Stamp Service □ ........□ Anti-corrosion check: OK □ Not OK* □ *See specific page Date: Miles (Km): Invoice number: Comments/miscellaneous Type of operation: Stamp Service □...

  • Page 186: Anticorrosion Check

    ANTICORROSION CHECK (1/5) If the continuation of the warranty is subject to repair, it is indicated below. VIN: ............Corrosion repair operation to be carried Stamp out: Date of repair: Repair to be carried out: Stamp Date of repair: Repair to be carried out: Stamp Date of repair: 6.14...
  • Page 187 ANTICORROSION CHECK (2/5) If the continuation of the warranty is subject to repair, it is indicated below. VIN: ............Corrosion repair operation to be carried Stamp out: Date of repair: Repair to be carried out: Stamp Date of repair: Repair to be carried out: Stamp Date of repair: 6.15...
  • Page 188 ANTICORROSION CHECK (3/5) If the continuation of the warranty is subject to repair, it is indicated below. VIN: ............Corrosion repair operation to be carried Stamp out: Date of repair: Repair to be carried out: Stamp Date of repair: Repair to be carried out: Stamp Date of repair: 6.16...
  • Page 189 ANTICORROSION CHECK (4/5) If the continuation of the warranty is subject to repair, it is indicated below. VIN: ............Corrosion repair operation to be carried Stamp out: Date of repair: Repair to be carried out: Stamp Date of repair: Repair to be carried out: Stamp Date of repair: 6.17...
  • Page 190 ANTICORROSION CHECK (5/5) If the continuation of the warranty is subject to repair, it is indicated below. VIN: ............Corrosion repair operation to be carried Stamp out: Date of repair: Repair to be carried out: Stamp Date of repair: Repair to be carried out: Stamp Date of repair: 6.18...
  • Page 191 ..........6.4 troubleshooting ..........5.17 – 5.18 engine coolant ..............4.7 battery (remote control) .......... 5.19 – 5.20 engine immobiliser battery (Renault card) ..........5.21 – 5.22 system ................. 1.16 bonnet.................. 4.2 engine oil ..............4.3 → 4.5 brake fluid ................4.6 engine oil capacity .............4.3 →...
  • Page 192 ALPHABETICAL INDEX (2/3) grade ................1.64 fuel economy ...........2.13 → 2.15 levels ................4.6 – 4.7 fuel filler cap ..............1.63 lifting the vehicle fuel grade..............1.63 –1.64 changing a wheel ..........5.5 – 5.6 fuel tank ..............1.63 –1.64 lighting fuses ..............5.13 →...
  • Page 193 ALPHABETICAL INDEX (3/3) puncture..............5.2 – 5.3 technical specifications ............6.4 telephone ................3.24 tool kit .................. 5.4 radio frequency remote control/key towing use ................. 1.3 breakdown ..............5.24 rear headrest ..............3.19 towing hitch................ 5.24 rear parcel shelf ..............3.22 transporting children ..........1.29 →...
  • Page 195 Your RENAULT vehicle is manufactured to meet the regulations and environmental requirements of the country where such RENAULT v ehicle is originally sold. Incase you relocate it to another country, it may be very difficult to make modifications to comply with the regulations and environmental requireme- nts of that c ountry and it may be difficult to perform repair service in that country.
  • Page 196 It is the authorised RENAULT Dealer’s discretion to decide whether it is appropriate to repair or replace the defective part, w hilst keeping the Customer informed, 24/7 assistance services as defined in the “Renault Assistance”...
  • Page 197 Misuse, abuse, negligence, improper driving habits, theft etc. of the vehicle; 4.6.4 Damage from stress, like use of vehicles in races, rallies, etc., 4.6.5 Use of parts other than Renault Genuine Parts. 4.6.6 Any device and/or accessories not supplied by RIPL. 4.6.7 Modifications, alterations, tampering or improper repair.
  • Page 198 Manufacturer have been carried out; 5.1.4 have the defect covered by the RENAULT New Vehicle Warranty confirmed as soon as possible, by a Renault a uthorised workshop in writing. If the vehicle is un -roadworthy, the...
  • Page 199 RENAULT authorized network and not observing the manufacturer’s recommendations on the subject. 5.3 By way of consideration f or the parts supplied by RIPL und er the RENAULT New Vehicle Warranty, parts replaced under this warranty legally become the property of RIPL.
  • Page 200 In this case, the Customer m ust advise Renault Assistance as soon as they exit the motorway or similar highway. 6.5 WARNING: Renault Assistance will not be liable for any costs accrued by the Customer without prior written consent from Renault.
  • Page 201 In addition to the RENAULT New Vehicle Warranty, RENAULT guarantees the bodywork and sub frame of all RENAULT vehicles in the Schedule I from perforation from the interior, due to steel panel corrosion c aused by a manufacturing, material or protective product application...
  • Page 202 Customer. 7.4 The Renault Anticorrosion Warranty does not cover: 7.4.1 any damage which is not covered by the RENAULT New Vehicle Warranty, as defined at the start of this booklet; 7.4.2 Mechanical components which are not an integral part of the bodywork or sub-frame (wheel rims, exhaust system, etc.).
  • Page 203 7.5.6 Repairs on any deterioration must be made as soon as possible. 7.5.7 The application of the RENAULT Anticorrosion Warranty is also subject to bodywork and sub- frame repairs being carried out in accordance with RENAULT recommendations. 7.5.8 The repair or replacement of components under the conditions described in the “ field of application”...
  • Page 204 8.4 The RENAULT Paintwork Warranty does not cover: 8.4.1 any damage which is not covered by The RENAULT New Vehicle Warranty, as defined at the start of this booklet; 8.4.2 damage due to force majeure events: lightning, fire, floods, earthquakes, war , riots and attacks;...
  • Page 205 All disputes arising out of this Warranty will be subject to the jurisdiction of Courts in Chennai only. EXTENDED WARRANTY Renault offers “ Renault Secure” Integrated Extended Warranty and Roadside Assistance Program on select models, in addition to the new vehicle warranty. Kindly Contact 1800 315 44 44 (Toll Free number) or your nearest Renault Dealer for more details.
  • Page 210 It is recommended to use engine oil with viscosity grade SAE 15W40 (B4D engine) / SAE 5W40 (H4D engine)
  • Page 226 1 11 11 RENAULT 5.A.5. SOCIETE PAR ACTIONS SIMPLIFIEE AU CAPITAL DE 533 941 113 € / 13-15, QUAI LE GALLO 92100 BOULOGNE-BILLANCOURT R.C.5. NANTERRE 780 129 987 -5IRET 780 129 987 03591 /TEL : 0810 40 50 60 9 9 9 1 0 8 9 3 1 S...

Table of Contents