Rheem RIWH09AVFJ Design & Technical Manual page 47

 Pattern B
1. Modify the remote controller cable as follows:
• Use a tool to cut off the terminal on the end of the remote controller cable and then
remove the insulation from the cut end of the cable as shown in following figure.
• Connect the remote controller cable and connecting cable as shown in following figure.
• Be sure to insulate the connection between the cables.
2. Connect the remote controller cable.
• Connect the cable made in step 1. to the indoor unit PCB.
¢ Optional parts
RIWH07—15AVFJ
The communication kit is needed for connecting the wired remote controller to the wall mount-
ed type.
Remote controller cable
Connecting cable
Remote controller cable
Wall mounted
Connecting
cable
White
Red
White
Insulated
Red
connection
Black
Indoor unit PCB
- 41 -
Black
Model name
RXXCBXZ2