Information On Peak-Load Negotiation - Miele PT 8257 WP Operating And Installation Instructions

en - Optional modules
The data is deleted by pressing the  function button.

Information on peak-load negotiation

 Access to the internal wiring of the tumble dryer is not permitted if the Miele peak-
load interface is bypassed.
The heat-pump dryer can be incorporated into energy management, even if the low energy
consumption of this tumble dryer means that switching it off is unnecessary.
Depending on the function, switching off the appliance externally during the drying process
when the heat-pump is in use reduces the service life of the appliance. When this tumble
dryer is integrated into a peak-load management system, it must be ensured that the sys-
tem is not switched off.
Information on operational state is made available via the Miele peak-load interface. The
energy consumption of all appliances that cannot be switched off in the energy manage-
ment system must be stored by the control system.
32