Selecting The Additional "Block+"  Function; Starting A Drying Programme Without Making Changes; Making Changes To The Drying Programme Before Starting It - Miele PT 8257 WP Operating And Installation Instructions

en - Drying
Selecting the additional "Block+"  function
(Not for standard programmes)
2 Cottons dry
0 % Drying
Cooling down

Example display after programme confirmation
Press the  function button to add the required programme block to the drying pro-

gramme (e.g. Pre-drying).
The  field remains highlighted after the function button is pressed.
2 Cottons dry
0 % Drying
Cooling down

Example display with Block+ function selected
The function can be de-selected by pressing the function button again.

Starting a drying programme without making changes

If you do not want to make any further changes to the drying programme:
Press the  button to start the drying programme.

The drying programme is now running.

Making changes to the drying programme before starting it

The following steps describe how to make changes to the parameters, such as load capa-
city, temperature or residual moisture, before the programme starts.
First press the selector dial to confirm the selected programme.

2 Cottons dry
0 % Drying
Cooling down
The maximum load capacity appears in the top right-hand side of the display. You now
have the option of making changes to the drying programme.
16
10,0 / 13,0 kg
70 °C



10,0 / 13,0 kg
70 °C



10,0 / 13,0 kg
70 °C


