Connecting The Power Supply, Terminal-Connected Versions - Grundfos MAGNA3 25-80 Installation And Operating Instructions Manual

3.11 Connecting the power supply, terminal-connected
versions
Step Action
Remove the front
cover from the
control box.
1
Do not remove the
screws from the
cover.
Locate the power
supply plug and
cable gland in the
2
small cardboard box
supplied with the
pump.
Connect the cable
3 gland to the control
box.
Pull the power supply
4 cable through the
cable gland.
Illustration
Step Action
Strip the cable
5 conductors as
illustrated.
Connect the cable
6 conductors to the
power supply plug.
Insert the power
supply plug into the
7
male plug in the
pump control box.
Tighten the cable
8 gland.
Fit the front cover.
Illustration
7 mm
20 mm
Min. Ø 7 mm
Max. Ø 14 mm
13