Specifications - Grohe Sensia ARENA 39355SH0 User Manual

 Specifications
Model No.
Rated voltage / Frequency power
Rated power consumption
Maximum power consumption
Feed-Water Pressure
Operating Temperature Range
Product Dimensions
Product Weight
Pre-wash Water Volume
Flushing Water Volume
Ceramic
Water supply method
Bowl
Drain type
Flushing method
Shower
Warm air
E-bidet
Plasmacluster
(Seat Unit)
ion
(Toilet bowl)
Plasmacluster
ion (Room)
Seat heating
Odor
Absorption
Music play
Smartphone
39355SH0
AC 220 - 240 V, 50/60 Hz
850 W (environment 20°C, water 15°C)
1300 W (environment 20°C, water 3°C)
Required minimum
0.1 MPa (1.0 bar) (When flows)
water pressure
Maximum water
0.75 MPa (7.5 bar) (Hydrostatic pressure)
pressure
0°C - 40°C
W 377 mm× D 660 mm× H 485 mm (Seat unit and ceramic
bowl)
Approx. 41.5 kg (Seat unit: Approx. 6.0 kg, Ceramic bowl:
Approx. 35.5 kg)
0.3 L
Full 4.5 L, Light 3 L
Uses existing water supply line
305mm
Direct valve
Water supply method Uses existing water supply line
Method of warm water
Instant water heater
supply
Nozzles Motor driven, exclusive for rear and front washing
Rear washing: φ 1.45 mm × 1 hole,
Nozzles Holes Rear washing-gentle: φ0.9 mm × 4 holes,
Front washing: φ 0.8 mm × 5 holes
Rear washing spray Rear washing: 0.43 L/min (6-level adjustable), Rear washing-
volume gentle: 0.45 L/min (6-level adjustable)
Front washing spray
0.45 L/min (6-level adjustable)
volume
Warm water control Off (Water temp.), Low (Approx. 32°C) - High (Approx. 40°C),
temperature 6-level adjustable
Water heating capacity 1240 W
Safety Devices Thermal fuses, High temperature sensor switch, Flow switch
Air Volume 0.3 m
Warm Air Temperature Low (Room temp.), Medium (Approx. 40°C) - High (Approx.
Adjustments 55°C)
Warm Air Heater
500 W
Capacity
Safety Devices Thermal fuse (1 position)
Air blow flow rate: 0.04 m
Air Volume
Air suction flow rate: 0.04 m
Decomposition and removal method using Plasmacluster
System
technology (Utilizing air circulation)
Air blow flow rate: 0.04 m
Air Volume
Air suction flow rate: 0.04 m
Chemical adsorption method using a deodorizing cartridge,
System decomposition and removal method using Plasmacluster
technology
When used: Room temperature and in the range of approx.
28°C – 36°C (6 User-defined settings)
Surface temperature
When the one-touch power save (8 hours) is activated: Room
temperature
Heater capacity 48 W
Safety device Thermal fuse
Odor Absorption Chemical adsorption method using a deodorizing cartridge, Utilizing
Method air circulation.
Odor Absorption Air blow flow rate: 0.04 m
Capacity Air suction flow rate: 0.04 m
Output speaker 0.25W+0.25W (stereo), 1W
Audio compression,
Ogg (playback format), built-in memory
built-in memory
Method Bluetooth
3 /min
3 /min;
3
/min
3
/min;
3 /min
3
/min;
3 /min
®
67

Specifications