Preventing Freezing - Grohe Sensia ARENA 39355SH0 User Manual

Table of Contents

Advertisement

Available languages

Available languages

 Preventing Freezing
To prevent damage that may result from freezing water, follow the procedures described below.
(Do not turn off the power breaker or remove the power plug from the outlet, and the power save feature should be turned
off.)
General anti-freeze measures
1. Set the seat temperature to "high" and close the seat lid.
2. Turn off the power save function.
Intermittent flushing method
1. Set the seat temperature to "high" and close the seat lid.
2. Turn off the power save function.
3. Press the
(set/next) button repeatedly until the [SETTING 5] screen appears, then press the button below
[INTERMITTENT FLUSH] repeatedly to select [ON].
SETTING 5
INTER-
AUTO-
MITTENT
REGIST-
MATIC
FLUSH
RATION
DRAIN
O F F
[INTERMITTENT FLUSH]
• Water is drained from the seat unit every 3 minutes for approximately 1 minute to prevent water from freezing while
the toilet is not being used.
• The toilet is flushed every 6 minutes.
• Water is not drained when the seat is occupied.
• When selecting [OFF], the Intermittent Flushing function is off.
NOTE:
• When using the toilet again, be sure to perform
Draining the Seat Unit
1. Set the seat temperature to "high" and close the seat lid.
2. Turn off the power save function.
3. Operate the drain plug to drain water from the pipe.
• When operating the drain plug, do not close the shutoff valve.
• For details on the drain plug, refer to the manual of the drain plug.
4. Drain water from the seat unit.
Drain water from the seat unit according to the steps 2 and 3 of
(Page
27)
(Page
27)
INTIAL-
SETT-
ING
(set/next) button
"Preparation Before Use" (page
(Page
27)
Things you should know
(Page
21)
(Page
21)
14).
(Page
21)
"How to drain the water" (page
40
42).

Advertisement

Table of Contents
loading

Table of Contents