Nozzle; Cleaning The Nozzle Via Remote Control; Cleaning The Nozzle Manually - Grohe Sensia ARENA 39355SH0 User Manual

 Nozzle

Cleaning the Nozzle via Remote Control

To clean the nozzle while using the toilet (sitting on the seat) using the remote control, follow the procedure below.
SETTING 2
CLEAN- MOVE NIGHT
PRE WASH
ING OUT LIGHT

NOZZLE

NOZZLE

O N A U T O
2
1. Press the (set/next) button repeatedly until the [SETTING 2] screen appears.
2. Press the button below [CLEANING NOZZLE].
The nozzle remains retracted inside the body and is cleaned for approximately 15 seconds.

Cleaning the Nozzle Manually

You can clean the nozzles manually (such as by scrubbing those parts using a sponge to clean the stains etc.).
SETTING 2
CLEAN- MOVE NIGHT
PRE WASH
ING OUT LIGHT
NOZZLE NOZZLE
O N A U T O
4
1. Set the [AUTO FLUSH] and [AUTO OPEN/CLOSE] to [OFF] to disable these functions.
2. Lift the seat lid and seat.
3. Press the (set/next) button repeatedly until the [SETTING 2] screen appears.
4. Press the button below [MOVE OUT NOZZLE].
Each time the button is pressed, the toilet unit operates in the following order. Also, the shower will not operate in this
state.
1st Press: Rear washing nozzle extends
2nd Press: Front washing nozzle extends, after the rear washing nozzle has retracted
3rd Press: Nozzle shutter opens, after the front washing nozzle has retracted
4th Press: Nozzle shutter closes
5. Clean the nozzles.
6. Return the settings for [AUTO FLUSH] and [AUTO OPEN/CLOSE].
1
3
52
Cleaning and Maintenance
(Page
(Page 19, 20)
19, 20)