Mazda Mazda3 2019 Owner's Manual page 61

▼ Centre-Rear Seat Child-Restraint
System Installation
1. Make sure the seatback is securely
latched by pushing it back until it is
fully locked.
2. Remove the head restraint. However,
when installing a backless booster seat,
always install the vehicle head restraint
to the seat where the backless booster
seat is installed.
Refer to Head Restraints on page 2-18.
3. Secure the child-restraint system with
the seat belt, according to the
manufacturer's instructions.
4. Secure the tether strap according to the
child-restraint system manufacturer's
instruction.
WARNING
WARNING: child restraint anchorages are
designed to withstand only those loads
imposed by correctly fitted child restraints.
Under no circumstances are they to be used
for adult seat belts, harnesses or for
attaching other items or equipment to the
vehicle.
Always remove the head restraint and
install child-restraint system (except when
installing a backless booster seat):
Installing a child-restraint system without
removing the head restraint is dangerous.
The child-restraint system cannot be
installed correctly which may result in
death or injury to the child in a collision.
(Saloon)
1. Tether strap
2. Anchor bracket
(Hatchback)
1. Tether strap
2. Anchor bracket
3. Forward
Essential Safety Equipment
Child Restraint
2-47