Mazda Mazda3 2019 Owner's Manual page 34

Essential Safety Equipment
Seat Warmer/Heated Steering Wheel
Seat Warmer
▼ Seat Warmer
The front seats can be warmed up while
the engine is running.
While the seat warmer is operating, the
indicator light in the seat warmer switch
turns on according to the set temperature.
Manual mode
When the seat warmer switch is pressed,
the seat warmer operates in manual mode.
The set temperature changes as shown in
the figure each time the seat warmer
switch is pressed.
1. OFF
2. High
3. Mid
4. Low
NOTE
If the engine is turned off while the seat
warmer is operating in manual mode, the
seat warmer does not turn on
automatically the next time the engine is
turned on. To turn the seat warmer on,
press the switch again.
2-20
*Some models.
Auto mode
*
The driver and front passenger's seat
warmer can be operated in auto mode
using the following procedure.
1. If "Link Seat & Climate Control
2. Press the AUTO switch.
While in auto mode, the seat temperature
is automatically controlled in 4 levels
(High, Mid, Low, and OFF) according to
the conditions in the cabin.
NOTE
Temperatures" has been disabled,
enable it using the following
procedure.
a) Select "Settings" from the MZD
Connect home screen.
b) Select "Vehicle Settings".
c) Enable "Link Seat & Climate
Control Temperatures".
If the front passenger's seat belt is

unfastened, the front passenger's seat
warmer turns off.
If the seat warmer switch is pressed

during auto mode, the seat warmer on
the side where the switch was pressed
switches to manual mode. To return to
auto mode, press the AUTO switch.
If the engine is turned off while the seat

warmer is operating in auto mode, the
seat warmer operates in auto mode
again the next time the engine is turned
on.