Mazda Mazda3 2019 Owner's Manual page 505

▼ Mazda Radar Cruise Control with
Stop & Go function (MRCC with
Stop & Go function) System
*
Warnings
The Mazda Radar Cruise Control with
Stop & Go function (MRCC with Stop &
Go function) system warnings notify the
driver of system problems and precautions
on use when required. Check after hearing
a warning beep sound.
Warning beep
The beep sounds inter‐
mittently while the vehi‐
cle is being driven.
▼ Excessive Speed Warning
If the vehicle speed exceeds the speed
limit sign displayed in the active driving
display/instrument cluster, the area around
the speed limit sign flashes in amber and
the warning sound is activated at the same
time. If the vehicle speed continues to
exceed the displayed speed limit sign, the
indication stops flashing and remains on.
▼ Speed Limiter Warning Beep
If the vehicle speed exceeds the set speed
by about 5 km/h (3 mph) or more, a
warning beep operates continuously. The
warning beep operates until the vehicle
speed decreases to the set speed or less.
Warning/Indicator Lights and Warning Sounds
What to check
The distance between
your vehicle and the ve‐
hicle ahead is too close.
Verify the safety of the
surrounding area and re‐
duce vehicle speed.
CAUTION
If the set speed is set lower than the current
vehicle speed by pressing the SET- or RES
switch, the warning beep is not activated
for about 30 seconds even if the vehicle
speed is faster than the newly set speed by
5 km/h (3 mph). Be careful not to drive over
the set speed.
NOTE
When the system is temporarily cancelled
by depressing the accelerator pedal fully,
the ISA display shows the cancel display.
If the vehicle speed exceeds the set speed
by about 5 km/h (3 mph) or more while the
cancel display is displayed, the set speed
display flashes but the warning sound is
not operated.
▼ Collision warning
If there is a possibility of a collision with a
vehicle ahead or an obstruction at the rear
of the vehicle, a warning sound is
activated intermittently at the same time as
the warning indications are displayed in
the instrument cluster or active driving
display.
▼ Door-ajar Warning Beep
A warning beep is activated if the vehicle
is driven with a door ajar. Drive the
vehicle after closing the doors.
If Trouble Arises
7-41
*Some models.