Mazda Mazda3 2019 Owner's Manual page 523

Speed symbol
ZR
Tyre and inflation pressure
NOTE
The tyres have been optimally matched with the chassis of your vehicle.
When replacing tyres, Mazda recommends that you replace tyres of the same type originally
fitted to your vehicle. For details, contact an expert repairer, we recommend an Authorised
Mazda Repairer.
Check the tyre pressure label for tyre size and inflation pressure.
Refer to Tyre Pressure Label on page 9-2.

Refer to Tyre Inflation Pressure on page 6-28.

Standard tyre
Tyre size
205/60R16 92V
215/45R18 89W
1 person's weight: About 75 kg
Temporary spare tyre
Tyre size
T125/70D16 96M
Wheel nut tightening torque
When installing a tyre, tighten the wheel nut to the following torque.
108―147 N·m (12―14 kgf·m, 80―108 ft·lbf)
▼ Fuses
Refer to Fuses on page 6-34.
▼ Brakes
If you require information regarding the wear limit specification for the brake disc plates
and the measurement method, please contact an expert repairer, we recommend an
Authorised Mazda Repairer. The information is made freely available.
Up to 3 persons
Front 250 kPa (2.5 bar, 36 psi)
Rear 250 kPa (2.5 bar, 36 psi)
Front 250 kPa (2.5 bar, 36 psi)
Rear 250 kPa (2.5 bar, 36 psi)
Maximum permissible speed
Over 240 km/h (149 mph)
Inflation pressure
260 kPa (2.6 bar, 38 psi)
290 kPa (2.9 bar, 42 psi)
270 kPa (2.7 bar, 39 psi)
290 kPa (2.9 bar, 42 psi)
Inflation pressure
420 kPa (4.2 bar, 60 psi)
Specifications
Specifications
―Full load
9-7