Mazda Mazda3 2019 Owner's Manual page 431

Forcefully lowering the wiper arms

could damage the wiper arm and blade,
and may scratch or crack the
windscreen.
1. Move the wipers to the service
positions using the following
procedure.
a) Switch the ignition ON.
b) Switch the ignition OFF.
c) Press up the wiper switch to the
position 2 times within 30
seconds after switching the ignition
OFF.
When the procedure is completed,
the wipers operate and they stop at
the service positions.
2. Raise the wiper arms.
CAUTION
To prevent damage to the windscreen
let the wiper arm down easily, do not
let it slap down on the windscreen.
3. Slide the blade component in the
direction of the arrow while pressing
the wiper arm tab to remove the blade
component from the wiper arm.
Owner Maintenance
4. Pull the blade rubber in the direction of
the arrow and slide it to a position
where the blade holder groove can be
checked.
Maintenance and Care
6-19