Mazda Mazda3 2019 Owner's Manual page 433

7. After pulling the blade rubber in the
direction of the arrow and sliding the
blade rubber to a position to check the
blade holder groove, slide the blade
rubber end in the opposite direction.
8. Make sure that the blade rubber is
correctly installed to the blade holder.
9. Slide the blade component and install
it to the wiper arm.
10. Slowly lower the wiper arms onto the
windscreen.
Owner Maintenance
11. Move the wipers to their initial
positions using the following
procedure.
a) Make sure that the wipers are set on
the windscreen.
b) Switch the ignition ON.
c) Press up the wiper switch to the
position 1 time.
When the procedure is completed,
the wipers operate and they stop at
the initial positions.
▼ Replacing Rear Window Wiper
Blade (Hatchback)
When the wiper no longer cleans well, the
blade is probably worn or cracked.
Replace it.
CAUTION
To prevent damage to the wiper arm and
other components, do not move the wiper
by hand.
1. Raise the wiper arm and rotate the
wiper blade to the right until it
unlocks, then remove the blade.
Maintenance and Care
6-21