Mazda Mazda3 2019 Owner's Manual page 178

When Driving
Switches and Controls
NOTE
The headlights and other exterior lights may not turn off immediately even if the

surrounding area becomes well-lit because the light sensor determines that it is night time
if the surrounding area is continuously dark for several minutes such as inside long
tunnels, traffic jams inside tunnels, or in indoor parking lots.
The sensitivity of the auto-light control may be changed.

Refer to the Settings section in the MZD Connect Owner's Manual.
▼ Headlight High-Low Beam
The headlights switch between high and
low beams by moving the lever forward or
backward.
1. High beam
2. Low beam
When the headlight high-beams are on, the
headlight high-beam indicator light is
turned on.
4-52
▼ Flashing the Headlights
The headlights can be flashed with the
ignition switched to ON.
To flash the headlights, pull the lever fully
towards you (the headlight switch does not
need to be on).
1. OFF
2. Headlight flashing
The headlight high-beam indicator light in
the instrument cluster illuminates
simultaneously. The lever will return to
the normal position when released.