Checks With The Key Switch On; Operating Techniques - Hyster Narrow Aisle N30XMR3 Operating Manual

CHECKS WITH THE KEY SWITCH
ON
Do not start or operate the lift
truck, including any of its func-
tions or attachments, from any
place other than the designated
operator's position. Make sure
that the area around the lift truck
is clear before making any op-
erational checks. Be careful
when making the checks. Allow
the lift truck to move only enough
to check for correct operation.
WARNING
The operator must be aware that the lift truck can tip
over. There is a risk that the operator or someone else
can be killed or injured if trapped or hit by the truck as
it tips over.
NARROW AISLE
CAUTION
If the lift truck is stationary during a check, release the
brake pedal and proceed carefully.
Check the operation of the following functions as described
in the MAINTENANCE section.
Check the operation of the horn, gauges and indicator
S
lights.
Operate the lift, tilt, reach and auxiliary functions to
S
check for correct operation of the mast, carriage and
attachments.
Check the operation of the steering system.
S
Check the operation of the control handle.
S
Check the operation of the brake.
S

OPERATING TECHNIQUES

WARNING
The lift truck can tip over during operation. If you have
not read the WARNING page in the front of this Oper-
ating Manual, do so now. As you read the following in-
formation remember the warnings.
OPERATING PROCEDURES
25