Checks With The Key Switch Off - Hyster Narrow Aisle N30XMR3 Operating Manual

OPERATING PROCEDURES
CHECKS WITH THE KEY SWITCH
OFF
Inspect the lift truck before use and every eight hours or
daily as described in the MAINTENANCE section of this
OPERATING MANUAL.
Before using the lift truck, make the following checks:
Oil level in the hydraulic tank.
S
Electrolyte level and specific gravity of the battery.
S
Battery weight is within the range of battery weights on
S
the nameplate.
Battery panels are in place and correct spacers are
S
installed to limit horizontal battery movement to no more
than 1/2 inch.
Condition of forks, carriage, chains, mast and overhead
S
guard.
Leaks from the hydraulic system.
S
Condition of wheels and tires.
S
24
NARROW AISLE
WARNING
Report damage or faulty operation immediately. Do
not operate a lift truck if it is damaged or does not op-
erate correctly. A lift truck will only do its job when it is
in proper working order. If repairs are required, install
a tag in the operator's area stating DO NOT OPERATE
and remove the key from the key switch.
How to Check the SRO Circuit
The lift truck is equipped with a Static Return to OFF (SRO)
circuit that prevents travel of the lift truck if the starting
sequence is not correct. The function of the SRO circuit is
to make sure the operator is in the correct position to
operate the controls before the lift truck will operate. The
starting sequence:
1. Stand in the operator's compartment with one foot
pressing the brake pedal and one foot on the operator
sensing switch and the key switch on the ON position.
2. Move the multi-function control handle for forward
travel.
If Step 2 is done before Step 1 and the lift truck moves, the
SRO function is not operating correctly. The sequence
within Step 1 is not important. The lift truck must not be
operated if the SRO circuit does not function correctly.