Safety Instructions; Intended Use; Forseeable Misuse - MTS Systems Temposonics G Series Brief Instructions

Temposonics G-Series
®
Brief Instructions

2. Safety instructions

2.1 Intended use

This product may be used only for the applications defined
under item 1 only in conjunction with the third-party devices
and components recommended or approved by MTS
Sensors. As a prerequisite of proper and safe operation the
product requires correct transport, storage, mounting and
commissioning and must be operat ed with utmost care.
1. The sensor systems of all Temposonics
intended exclu sively for measurement tasks encountered
in industrial, commercial and laboratory applications.
The sensors are considered as system accessories and
must be connected to suitable evaluation electron ics,
e.g. a PLC, IPC, indicator or other electronic control unit.

2.2 Forseeable misuse

Forseeable misuse
Wrong sensor connection
Operate the sensor out off
the operating temperature
Power supply is out of the
defined range
Position measurement is
influenced by an external
magnetic field
Cables are damaged
Spacers are missing /
are installed in a wrong order
Wrong connection
of ground / shield
Use of a magnet that is not
certified by MTS Sensors
series are
®
Consequence
The sensor does not work
properly or will be destroyed
No signal output
The sensor can be damaged
Signal output is wrong /
no signal output /
the sensor will be damaged
Signal output is wrong
Short circuit – the sensor can
be destroyed / sensor does
not respond
Error in position
measurement
Signal output is disturbed
The electronics can be
damaged
Error in position
measurement
I 4
Do not reprocess the sensor afterwards.
 The sensor might be damaged.
Do not step on the sensor.
 The sensor might be damaged.
Manuals & Software available at:
www.mtssensors.com
I