Garmin GTN 625 Pilot's Manual page 546

Message
Foreword
FLIGHT PLAN
Getting
IMPORT -
Started
Changes to the
Audio &
active route are
Xpdr Ctrl
disabled.
Com/Nav
FLIGHT PLAN
IMPORT - GDU
FPL
disconnected.
External flight
Direct-To
plan crossfill
inoperative.
Proc
FPL WAYPOINT
Wpt Info
LOCKED -
Stored flight plan
Map
waypoint is not in
current navigation
Traffic
database.
FPL WPT MOVED -
Terrain
Stored flight plan
waypoint has
Weather
changed location.
Nearest
GLIDESLOPE -
Services/
Glideslope receiver
Music
has failed.
Utilities
GLIDESLOPE -
System
Glideslope receiver
needs service.
Messages
Symbols
Appendix
Index
16-10
Description
Unit receives a flight
plan from G3X Touch,
but the External FPL
Crossfill function is off.
Communication with
the G3X Touch is lost.
A stored flight plan
waypoint is no longer in
the current navigation
database.
A stored flight plan
waypoint has moved
by more than 0.33 arc
minutes from where
previously positioned.
The glideslope board
is not communicating
property with the
system.
The glideslope board is
indicating that it needs
service. The glideslope
board may continue to
function.
GTN 625/635/650 Pilot's Guide
Action
Enable the External FPL Crossfill
function.
Home > System > Setup >
External FPL Xfill.
Verify that the GDU is on.
Contact dealer for service.
Verify stored cataloged flight plans
and procedures. Modify stored
flight plans as necessary to include
waypoints that are in the current
navigation database.
Verify stored cataloged flight plans
and procedures. Modify stored
flight plans as necessary to include
waypoints that are in the current
navigation database.
Fly an approach that does not use
the glideslope receiver (VOR, LOC,
GPS). Contact dealer for service.
Verify glideslope deviation
indications with another source
and crosscheck final approach
fix crossing altitude. If another
glideslope source is not available
for verification, fly a GPS based
approach. Contact dealer for
service.
190-01004-03 Rev. P