Garmin GTN 625 Pilot's Manual page 229

8.3.3.2 Adding a Waypoint to the End of an Existing Flight Plan
1. Touch the Map page display. The Map Mode selection keys
will appear. Touch the Graphically Edit FPL key.
2. Touch a waypoint that you want to add to the end of the flight
plan.
3. Touch the Done key to accept the changes and return to the
Map page.
8.3.3.3 Removing a Waypoint from an Existing Flight Plan
1. Touch the Map page display. The Map Mode selection keys
will appear. Touch the Graphically Edit FPL key.
2. Touch waypoint, or airway, on the flight plan that you want
to remove.
3. Drag the flight plan line away from the waypoint, or airway,
and release the line. The waypoint will be removed from the
flight plan.
4. Touch the Done key to accept the changes and return to the
Map page.
190-01004-03 Rev. P GTN 625/635/650 Pilot's Guide
Foreword
Getting
Started
Audio &
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Services/
Music
Utilities
System
Messages
Symbols
Appendix
Index
8-39