Direct-To A Flight Plan Waypoint - Garmin GTN 625 Pilot's Manual

5.2

Direct-To a Flight Plan Waypoint

The Direct-To selection is not available for all flight plan entries. Some
flight plans entries including holds and course reversals cannot be selected for
Direct-To. Instead, select the associated waypoint for the Direct-To function.
1. Press the Direct-To key on the right side of the unit.
2. Touch the FPL tab on the left side of the Direct-To window.
Flight Plan Tab
3. Touch the leg of your flight plan you want to use. The Direct-To
Waypoint page will display information about the selected flight plan
waypoint.
Waypoint Tab
Waypoint Detail
4. Touch the Activate key or press the small right knob to
activate the selection.
5. The Map page will now be displayed with the new Direct-To
course.
190-01004-03 Rev. P
Figure 5-4 Direct-To Flight Plan Leg Selection
Figure 5-5 Selected Direct-To Flight Plan Leg
GTN 625/635/650 Pilot's Guide
Foreword
Audio &
Xpdr Ctrl
Com/Nav
Flight Plan
Direct-To
Waypoint List
Touch Waypoint
Key to Select
Wpt Info
Touch to Select a
Specific Course
Weather
Touch to Activate
Direct-To Nav to Nearest
this Waypoint
Services/
Messages
Symbols
Appendix
5-3
Getting
Started
FPL
Proc
Map
Traffic
Terrain
Music
Utilities
System
Index