Preparing The Chassis 操作前，車體準備 4 - THUNDER TIGER Sparrowhawk XXT Instruction Manual

2
PREPARING THE CHASSIS 操作前，車體準備
a
a. Remove the body pins (2 pcs.) and detach the body.
b. Straighten antenna and insert into antenna tube.
c. Put the antenna wire through the antenna pipe. (Do not cut or shorten antenna wire.!) Push the antenna pipe into the chassis
mount hole.
a. 將車殼固定車銷(共2個)拆除以取下車殼。
b. 將天線穿套進天線管內。
c. 將天線套管安裝於底板固定孔上(請勿裁短天線以免影響接收距離)。
3
INSTALLING RADIO & POWER SYSTEM BATTERIES
遙控器電池安裝
(Battery shown is not included in the kit 本產品不含充電電池)
a
a. Install 8pcs alkaline or rechargeable AA-size batteries (Not Included) into transmitter.
b. Install the power pack and connect to the ESC.
Caution: Confirm wiring and connections before connecting thespeed control to the battery. Incorrect polarity will damage
your speed control.
a. 安裝八顆三號鹼性電池或充電電池於發射機內。
b. 將開關座固定於接收機旁(如圖示)。將模型專用7.2V條狀充電電池裝入底板上並以R型固定插銷固定電池上蓋，連接電池條開關與
速控器。
注意！如使用自行焊接之充電電池請注意電池與速控器接線之正負極位置（反裝電極將造成電池短路或速控器之損壞）。
b
b
c