Page 1
Maintenance Manual & Parts Catalogue Introduction Thank you for purchasing this Thunder Tiger product. This manual contains the steps and instructions required to assemble your car. Please read this manual completely before attempting to start maintenance. Follow the directions in this manual closely to reduce problems during operation.
Safety Precautions Please read all of the instructions and familiarize yourself with the product and its controls before operation. 1. This product is not a toy. It is a high performance model car therefore it is important to familiarize yourself with the model, its manual, and its construction before assembly or operation.
Manual Format How to read the instruction manual? Example STEP4 The manual indicates the assembly step Front Suspension number and the parts that are to be assembled. The manual displays actual size drawings, and part quantities used. 10x15x4mm All parts, except screws, are identified by their Ball Bearing order numbers.
STEP1 Front Differential / Rear Differential 2.5x12mm F/H Philip Machine Screw 8x14x4mm Ball Bearing 3x5mm Washer 5x8mm Washer silicon oil 4.4x0.8mm O-Ring 3x19mm You may also use silicone oil to replace grease for the differentials. Fill up to 80%. Change the viscosity of the silicone oil according to track conditions and your driving style.
STEP4 Rear Suspension Rear Shock Tower 6 mm(L) Ball Stud (PD9104) 3x8 mm BT Philip Machine Screw 3x16 mm BT Philip Machine Screw STEP5 Front Differential Unit Leave one unit of drive axle for next step. 5x11x4 mm Ball Bearing 4 mm E-clip 2.5 mm...
STEP7 Shock Absorber Attach the shock eyelet onto the shock shaft until it reaches the mark line on the shaft. 2.5mm E-Clips Shock Eyelet 2.8x1.9 mm O-Ring Shock Shaft Cover the shaft with cloth before griping it with pliers. Shock Shaft Front x2 Rear x2 Pull down the piston and...
STEP8 Steering Bellcrank Top View 6mm(L) Ball Stud Rear Swing Post Screw 5x8x2.5mm Ball Bearing Side View Rear Note direction STEP8 Steering Bellcrank Side View 32.5 mm Ensure smooth, non-binding movement Apply grease Pay close attention here when assembling...
ACE R/C S1903/S2008MG ACE R/C DS1015/DS1313 Marked "T" for Thunder Tiger stock servo. Find the appropriate servo horn mount for your servo from the chart. Install the servo horn arm with the stock Airtronics / Sanwa / JR / KO mounting screw.
STEP16 Receiver & E.S.C. Anntenna Thread antenna cord through the tubing. STEP17 Tire/Wheels Tire insert foam Install the tire onto the wheel. Glue the tire to the wheel with instant glue in four spots around the tire on both sides. Warning: Follow the adhesive instructions for proper use and safety.
SPARROWHAWK XXB PARTS 2344 BL MOTOR IBL36/39-540C PD7034 MOTOR PINION GEAR,20T PD7712 ANTENNA BAG PD7837 MOTOR MOUNT PD7845 CHASSIS PD7846 SERVO MOUNT PD7847 BATTERY BRACE PD7864 OUTDRIVE CUPS PD7901 FRONT BULK SET PD7902 REAR BULK SET PD7905 DIFF SPUR GEAR 44T PD7915 FRONT TOE PLATE PD7916 REAR TOE PLATE PD7917 FRONT SUSP.
Page 24
SPARROWHAWK XXB PARTS PD7934 REAR WHEEL 43mm(B) PD7935 REAR TIRE W/FOAM 43mm PD7936-1 SHOCK TOWER SET PD7937 BALL STUD SPACER PD7938 REAR WING MOUNT PD7947 SHOCK BLADDER PD7954 METAL TURNBUCKLE SET PD7962-R SHOCK SPRING(R) PD7998 BULK LOWER COVER PD8098 SHOCK PISTON SET PD9051 DIFFERENTIAL CASE PD9077 STEERING BLOCK SET...
CFRP=CARBON FIBER REINFORCED PLATE ALUM=ALUMINUM SPARROWHAWK XXB OPTION PARTS 1340 ROTATING CAR STAND, O PD2302 TIE END SET PD7713 LONG HEX ADAPTER PD7722 ALUM STEERING BLOCK SET PD7723 ALUM CASTER BLOCK SET PD7724 ALUM HUB CARRIER SET PD7876 ALUM HEX ADAPTER PD7877 AL BATT.