Toyota Yaris HV 2017 Manual page 365

Setting automatic connection of the device on or off
If "BT power" is set to on, the registered device will be connected
automatically when the power switch is turned to the "ACC" position
(vehicles without a smart entry & start system) or ACCESSORY mode
(vehicles with a smart entry & start system).
1 Select "BT power" using the tune/scroll knob. (P. 358)
2
Select "On" or "Off" using the knob.
Displaying the device status
Select "Bluetooth
● Displaying the device name
Select "Device name" using the tune/scroll knob.
● Displaying the device address
Select "Device address" using the tune/scroll knob.
*
: Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Setting the automatic connection confirmation display to on or off
If the "Display setting" is set to on, the Bluetooth phone/portable
player connection status will be displayed when the power switch is
turned to the "ACC" or "ON" position (vehicles without a smart entry &
start system), or ACCESSORY or ON mode (vehicles with a smart
entry & start system).
1
Select "Display setting" using the tune/scroll knob. (P. 358)
2
Select "On" or "Off" using the knob.
YARIS_HV_OM_Europe_OM52G33E
*
info" using the tune/scroll knob. (P. 358)
5-7. "SETUP" menu
365
5