Toyota Yaris HV 2017 Manual page 298

298
4-5. Toyota Safety Sense
■
When driving vehicle in country with different speed unit
Since RSA recognizes signs based on the set unit of the meter, it is neces-
sary to change the set unit of the meter. Adjust the set unit of the meter to the
speed unit of signs in the current location. (P. 608)
■
Turning the system on/off
Select
1
(P. 125)
Press the enter/set switch on the meter
2
control switches.
■
Speed limit sign display
If the power switch was last turned off while a speed limit sign was displayed
on the multi-information display, the same sign displays again when the
power switch is turned to the "ON" position (vehicles without a smart entry &
start system) or ON mode (vehicles with a smart entry & start system).
■
When "Check RSA system." is displayed on the multi-information dis-
play
The system may be malfunctioning. Have the vehicle inspected by any autho-
rized Toyota retailer or Toyota authorized repairer, or any reliable repairer
immediately.
■
Customization
The settings for warning display, warning buzzer
old, etc., can be changed. (Customizable feature: P. 608)
*
: If a speed limit with supplemental mark is exceeded, the warning buzzer
does not operate.
WARNING
■
Before using the RSA
Do not rely solely upon the RSA system. RSA is a system which supports
the driver by providing information, but it is not a replacement for a driver's
own vision and awareness. Drive safely by always paying careful attention
to the traffic rules.
Inappropriate or negligent driving could lead to an unexpected accident.
YARIS_HV_OM_Europe_OM52G33E
on the settings display
*
, speeding warning thresh-