Danfoss VLT PROFIBUS DP MCA 101 Programming Manual page 43

Parameters
9-91 Changed Parameters (2)
Array [116]
No LCP access
Read only
Range: Function:
0 [0 - 9999 ] This parameter displays a list of all the
*
frequency converter parameters deviating from
default setting.
9-92 Changed Parameters (3)
Array [116]
No LCP access
Read only
Range: Function:
0 [0 - 9999 ] This parameter displays a list of all the
*
frequency converter parameters deviating from
default setting.
MG37G102
Programming Guide
9-94 Changed Parameters (5)
Array [116]
No LCP Address
Read only
Range:
0 [0 - 9999 ] This parameter displays a list of all the
*
16-84 Comm. Option STW
Range:
0 [0 - 65535 ] View the extended fieldbus comm. option
*
16-90 Alarm Word
Range:
0 [0 - 4294967295 ] View the alarm word sent via the serial
*
16-92 Warning Word
Range:
0 [0 - 4294967295 ] View the warning word sent via the serial
*
Danfoss A/S © Rev. 05/2014 All rights reserved.
Function:
frequency converter parameters deviating from
default setting.
Function:
status word.
For more information, refer to the relevant
fieldbus manual.
Function:
communication port in hex code.
Function:
communication port in hex code.
6 6
41