Certification; Safety Symbols; Safety Notices - Keysight Technologies E9320 Series Operating And Service Manual

Certification

Keysight Technologies certifies that this product met its published specifications
at the time of shipment from the factory. Keysight Technologies further certifies
that its calibration measurements are traceable to the United States National
Institute of Standards and Technology, to the extent allowed by the Institute's
calibration facility, and to the calibration facilities of other International Standards
Organization members.

Safety Symbols

The following symbols on the instrument and in the documentation indicate
precautions which must be taken to maintain safe operation of the instrument.

Safety Notices

This guide uses warnings and cautions to denote hazards.
A warning calls attention to a procedure, practice or the like, which, if not
WARNING
correctly performed or adhered to, could result in injury or loss of life. Do not
proceed beyond a warning until the indicated conditions are fully
understood and met.
A caution calls attention to a procedure, practice or the like which, if not
CAUTION
correctly performed or adhered to, could result in damage to or the
destruction of part or all of the equipment. Do not proceed beyond a caution
until the indicated conditions are fully understood and met.
Keysight E9320 Operating and Service Guide
The Instruction Documentation Symbol. The product is marked with this symbol
when it is necessary for the user to refer to the instructions in the supplied
documentation.
3