Introduction; Possible Debuggers And Ides That Can Be Used - NGX Technologies LPC435x-Xplorer++ Quick Start Manual

Quick Start Guide: LPC435x-Xplorer++

1.0 INTRODUCTION

This document is a 'Quick Start Guide' for LPC435x-Xplorer++; a cost effective evaluation platform for
NXP's LPC435x MCU. This document focuses on the kit contents, board verification, possible
debuggers and IDEs that can be used.

1.1 Possible Debuggers and IDEs that can be used


ULINK2 with KEIL uVision

NXP LPCLink

Red Probe+ with

I-jet with IAR Embedded Workbench

Segger JLink with
The LPC435x-Xplorer++ is packaged as shown in the following image.
4
with LPCXpresso
Red Suite from Code Red
IAR Embedded Workbench
www.ngxtechnologies.com
or KEIL uVision
TBD
Fig. 1