Advertisement
Supplementary Specification
1. The 0.8M gear is standard configuration of motor. If need 0.4M/0.5M/0.6M motors' gear,
please contact our after service or purchase in PDMOVIE official AliExpress store directly.
2. If the motor has any problems in the calibration process, please press the Channel button
once for stopping the calibration.
3. When controlling the SLR Lens, it suggests the motor rotation speed of being adjusted to
medium or slow. It is the best control speed for SLR shoot.
4. Recommend the SLR camera lens user using the manual calibration for calibrating.
5. The standard configuration of the power supply is B port power cable of the V-Mount
battery. The normal operating voltage of the motor is between 7V~20V. After sells service
supports the service of changing the cable and so on.
6. The standard configuration of the power supply is B port power cable of the V-Mount
battery. The normal operating voltage of the motor is between 7V~20V. After sells service
supports the service of changing the cable and so on.
7. The normal working time of the controller PD4-HT is 12 hours. If there is insufficient
power in the work, the mobile power supply with USB 5V output can be used for charging.
The normal charge for 60 minutes can be full.
8. Battery maintenance: Recommend to checking the power consumption every month to
ensure that the battery has enough power when you do not use the battery. When the
equipment is in a state of low power or no electricity for a long time, it will lead to a smaller
capacity of the battery. Overcharging or over discharging for a long time will cause loss to
the battery. It is recommended that the user keep the device power at 50~74%.
Advertisement
