Preventing Electrostatic Discharge; European Hazardous Location Approval - Rockwell Automation Allen-Bradley 1756-EWEB Installation Instructions Manual

4 EtherNet/IP Web Server Module

Preventing Electrostatic Discharge

ATTENTION

European Hazardous Location Approval

European Zone 2 Certification (The following applies when the product
bears the EEx Marking)
This equipment is intended for use in potentially explosive atmospheres as
defined by European Union Directive 94/9/EC.
The LCIE (Laboratoire Central des Industries Electriques) certifies that this
equipment has been found to comply with the Essential Health and Safety
Requirements relating to the design and construction of Category 3
equipment intended for use in potentially explosive atmospheres, given in
Annex II to this Directive. The examination and test results are recorded in
confidential report No. 28 682 010.
Publication
1756-IN588A-EN-P - February 2004
This equipment is sensitive to electrostatic discharge,
which can cause internal damage and affect normal
operation. Follow these guidelines when you handle this
equipment:
• Touch a grounded object to discharge potential
static.
• Wear an approved grounding wriststrap.
• Do not touch connectors or pins on component
boards.
• Do not touch circuit components inside the
equipment.
• If available, use a static-safe work station.
• When not in use, store the equipment in
appropriate static-safe packaging.