Rockwell Automation Allen-Bradley 1756-EWEB Installation Instructions Manual page 17

Obtain an IP Address
By default, the web server module is DHCP enabled. If you connect the web
server module to a network that has a DHCP server, that server will assign a
dynamic IP address to the web server module and the four-digit display on the
front of the web server module will display each of the four numbers of the IP
address.
If your network does not have a DHCP server, use one of the methods
described in chapter 2 of the EtherNet/IP Web Server Module User Manual,
publication ENET-UM527 to assign an IP address to the web server module.
Access the Home Page of the Module
From your web browser, enter the IP address of the web server module. The
module displays its Home page.
Specify the IP address of
the web server module in
the Address window of your
web browser.
EtherNet/IP Web Server Module 17
Publication
1756-IN588A-EN-P - February 2004
This is the module's
home page..