Rockwell Automation Allen-Bradley 1756-EWEB Installation Instructions Manual page 21

3. Click on the Add
Continue adding as many tags as you want to configure.
4. Click Create View.
5. From the Data Views → Data View page, select the data view you just
created.
6. Click on the filename link to view the tags in this data view.
7. Type the new value in the box next to the tag and click the Update
button. This changes the value in the controller. You can use
RSLogix 5000 programming software to verify that the value
TM
changed.
EtherNet/IP Web Server Module 21
button to add the tag to the data view
Publication
1756-IN588A-EN-P - February 2004