NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1. Place the touch pad on the palm-rest assembly.
2. Slide the tabs on the touch-pad bracket into the slots on the palm-rest assembly.
3. Align the screw holes on the touch-pad bracket with the screw holes on the palm-rest assembly.
4. Replace the screws that secure the touch-pad bracket to the palm-rest assembly.
5. Adhere the tape over the touch-pad bracket.
6. Connect the touch-pad cable to the touch pad.
Post-requisites
1. Replace the
system
board.
2. Replace the
heat-sink
assembly.
3. Replace the
IO
board.
4. Replace the
wireless
card.
5. Replace the
memory
module.
6. Follow the procedure from step 3 to step 5 in "Replacing the
7. Follow the procedure from step 3 to step 7 in "Replacing the
8. Follow the procedure from step 4 to step 5 in "Replacing the
9. Replace the keyboard.
10. Replace the battery.
54
Replacing the touch pad
Replacing the touch pad
computer. After working inside your computer, follow the instructions in
hard
drive".
base
cover".
optical
drive".
32
After