NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1. Connect the camera cable to the camera.
2. Align the camera to the alignment posts on the display back-cover and snap the camera in place.
Post-requisites
1. Replace the
display
bezel.
2. Replace the
display
assembly.
3. Replace the
system
board.
4. Replace the
heat-sink
assembly.
5. Replace the
IO
board.
6. Replace the
wireless
card.
7. Replace the
memory
module.
8. Follow the procedure from step 3 to step 5 in "Replacing the
9. Follow the procedure from step 2 to step 7 in "Replacing the
10. Follow the procedure from step 4 to step 5 in "Replacing the
11. Replace the keyboard.
12. Replace the battery.
70
Replacing the camera
Replacing the camera
computer. After working inside your computer, follow the instructions in
hard
drive".
base
cover".
optical
drive".
42
After