NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1. Align the screw hole on the optical-drive bracket with the screw hole on the optical drive.
NOTE:
You must correctly align the optical-drive bracket to ensure that the optical drive can be properly secured to
the computer. For correct orientation, see step 5 in
2. Replace the screw that secures the optical-drive bracket to the optical drive.
3. Align the tabs on the optical-drive bezel with the slots on the optical drive and snap the optical-drive bezel into place.
4. Slide the optical-drive assembly into the optical-drive bay.
5. Replace the screw that secures the optical-drive assembly to the base cover.
Post-requisites
Replace the battery.
14
Replacing the optical drive
Replacing the optical drive
computer. After working inside your computer, follow the instructions in
"Removing the optical
drive".
6
After