Replacing The Fan; Procedure; Post-Requisites - Dell 3000 Series Service Manual

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•

Procedure

•

Post-requisites

Procedure
1. Place the fan on the heat sink.
2. Adhere the tape that secures the fan cable to the heat-sink assembly.
3. Turn the heat-sink assembly over.
4. In sequential order, as indicated on the heat sink, tighten the captive screws that secure the heat-sink assembly to the system board.
Post-requisites
1. Replace the heat-sink assembly.
2. Follow the procedure from step 3 to step 7 in "Replacing the
3. Replace the keyboard.
4. Follow the procedure from step 4 to step 5 in "Replacing the
5. Replace the battery.
computer. After working inside your computer, follow the instructions in
base cover".
optical drive".

Replacing the fan

Replacing the fan
28
After
45