NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
1. Remove the battery.
2. Follow the procedure from step 1 to step 3 in "Removing the
3. Remove the keyboard.
4. Follow the procedure from step 1 to step 5 in "Removing the
5. Follow the procedure from step 1 to step 3 in "Removing the
6. Remove the
memory
module.
7. Remove the
wireless
card.
8. Remove the
IO
board.
9. Remove the
heat-sink
assembly.
10. Remove the
system
board.
Procedure
1. Peel the tape off the touch-pad bracket.
1. tape
Removing the touch pad
computer. After working inside your computer, follow the instructions in
optical
drive".
base
cover".
hard
drive".
2. touch-pad bracket
31
After
Removing the touch pad
51