NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1. Align the notch on the memory module with the tab on the memory-module slot.
2. Slide the memory module firmly into the slot at an angle and press the memory module down until it clicks into place.
NOTE:
If you do not hear the click, remove the memory module and reinstall it.
1. notch
3. securing clips (2)
5. tab
Post-requisites
1. Follow the procedure from step 3 to step 7 in "Replacing the
2. Replace the keyboard.
3. Follow the procedure from step 4 to step 5 in "Replacing the
26
Replacing the memory module
Replacing the memory module
computer. After working inside your computer, follow the instructions in
2. memory module
4. memory-module slot
base
cover".
optical
drive".
14
After