Control Column; Pc4 Physical Controller Midi Cc Numbers - Kurzweil Flash Play PC4 Musician's Manual

Control Column

The Control column determines which physical controller (or external MIDI CC number)
will control the parameter in the selected row. To quickly assign one of the PC4's physical
controllers to a parameter, select the control column in the row of the desired parameter,
hold the ENTER button and move the desired controller. Alternatively, you can use the
Alpha Wheel or the Previous/Next buttons to select a controller from the list, or type in
the controller's MIDI number followed by the ENTER button. See below for a list of PC4
physical controllers and their associated MIDI numbers.
If you want to disable the controller for a parameter, you can select a value of None by
scrolling to the bottom of the controller list (using the Alpha Wheel or the Previous/Next
buttons), or type -1 followed by the ENTER button.
To choose an external MIDI CC number as a control source, you can enter the number of
the controller followed by the ENTER button, or use the Alpha Wheel or the Previous/Next
buttons. The PC4's physical controllers each use one of the available MIDI CC numbers,
so you must choose one of the other available CC numbers when using an external MIDI
control source or else the parameter will also be controlled by a PC4 physical controller.
MIDI CC numbers associated with the PC4's physical controllers are shown in the list below.

PC4 Physical Controller MIDI CC Numbers

Mod Wheel (MIDI CC 1)
CC Pedal 2 (MIDI CC 4)
CC Pedal 1 (MIDI CC 11)
Slider 1 (MIDI CC 12)
Slider 2 (MIDI CC 13)
Knob 5 (MIDI CC 14)
Knob 6 (MIDI CC 17)
Knob 7 (MIDI CC 18)
Ribbon Section 1 (MIDI CC 21)
Slider 3 (MIDI CC 22)
Knob 8 (MIDI CC 3)
Knob 9 (MIDI CC 9)
Slider 4 (MIDI CC 23)
Slider 5 (MIDI CC 24)
Slider 6 (MIDI CC 25)
Slider 7 (MIDI CC 26)
Slider 8 (MIDI CC 27)
Slider 9 (MIDI CC 28)
Variation Button (MIDI CC 29)
Sw. Pedal 1a (MIDI CC 64)
Sw. Pedal 1b (MIDI CC 66)
Sw. Pedal 2a (MIDI CC 66)
Sw. Pedal 2b (MIDI CC 67)
Knob 1 (MIDI CC 71)
Program Edit Mode
The PARAMS Page
Knob 3 (MIDI CC 72)
Knob 2 (MIDI CC 73)
Knob 4 (MIDI CC 79)
Switch 1 (MIDI CC 80)
Switch 2 (MIDI CC 81)
Switch 3 (MIDI CC 82)
Switch 4 (MIDI CC 83)
Switch 5 (MIDI CC 85)
Switch 6 (MIDI CC 86)
Switch 7 (MIDI CC 87)
Switch 8 (MIDI CC 89)
Switch 9 (MIDI CC 90)
3-7