Emerson Rosemount 648 Quick Start Manual page 4

Quick Start Guide
Conduit entry
Upon installation, ensure each conduit entry is either sealed with a conduit plug
using approved thread sealant, or has an installed conduit fitting or cable gland
with appropriate threaded sealant.
Figure 2. Conduit Entry
A
A. Conduit entry
Field Communicator connections
The black power module needs to be installed in the device for the Field
Communicator to interface with the Rosemount WDM Special. For HART
Wireless Transmitter communication via a Field Communicator, a Rosemount
WDM Device Dashboard (DD) is required. See
more information regarding the WDM DD.
Refer to Figure 3
WDM Special.
Figure 3. Connection
1
2
P/N 00753-9200-0020
3
COMM
4
4
A
for connecting the Field Communicator to the Rosemount
WHT
#K1197
"Configuration" on page 6
February 2019
for