Securing The Fabric - Carefree Compass Installation Manual

C
OMPASS
13. On the back of the motor and idler heads, remove
the plastic retaining clip covers and discard.
14. Rotate the access covers up and snap into the
retaining clip openings.
15. Install the hole plugs in the front channel:
15.1. From the back of the channel, insert the plug into the hole.
15.2. Twist to lock into place.
S F
ECURING THE
1. Roll the awning in and out several times to make sure that the fabric rolls up straight.
2. Attach the canopy in the awning rail using one #6 x 3/8" hex head
screw on one side of the awning. Place screw through awning rail,
fabric and polyrod approximately 1" in from the end of the fabric.
3. On the opposite side, pull the fabric tight in the awning rail place one
#6 x 3/8" hex head screw on one side of the awning. Place screw
through awning rail, fabric and polyrod approximately 1" in from the
end of the fabric.
6
Installation Manual
ABRIC
Clip Cover
Access
Cover
Back of Motor Head
Place Plug
in Hole
View Inside of Arm Channel
Awning Rail
Carefree of Colorado
Clip Cover
Access
Cover
Back of Idler Head
Alt007
Hole Plug
(2 per arm)
Twist to
Lock in Place
Alt005
1" Polyrod
#6 x 3/8
Screw
Fabric
LG008
070035-001r1