Carefree FIESTA Installation Manual
Hide thumbs Also See for FIESTA:

Advertisement

RV
Read this manual before installing or using this product. Failure to follow the instructions
and safety precautions in this manual can result in personal injury and/or cause the
product to not operate properly.
These instructions apply to Fiesta & Fiesta HD Awnings. These instructions may also be
used as reference for the Spirit and Simplicity Awnings that have been discontinued.
T
C
ABLE OF
ONTENTS
Component Checklist.................................................................................................................... 1
Installation ..................................................................................................................................... 2
Installing an awning rail (if required) ....................................................................................................... 2 
Assembling the Awning .......................................................................................................................... 3 
Mounting the Bottom Mounting Brackets ................................................................................................ 3 
Mounting the Awning .............................................................................................................................. 4 
Installing the Stop Bolt .................................................................................................................... 5 
Securing the Fabric ........................................................................................................................ 5 
Installing the Rubber Bumpers ....................................................................................................... 5 
Factory Installed LEDs (Optional) ................................................................................................ 6
White LED Schematic and Layout .......................................................................................................... 6 
Harness Routing into the Vehicle ........................................................................................................... 6 
Switch Installation ................................................................................................................................... 7 
052876-005r3
F
& F
IESTA
Printed in USA
I
NSTALLATION
HD P
IESTA
M
ANUALLY
M
ANUAL
A
ATIO
WNINGS
O
P
PERATED
ATIO
February, 2017
A
WNING
 
 
 

Advertisement

Table of Contents
loading

Summary of Contents for Carefree FIESTA

  • Page 1: Table Of Contents

    These instructions apply to Fiesta & Fiesta HD Awnings. These instructions may also be used as reference for the Spirit and Simplicity Awnings that have been discontinued.
  • Page 2 ROPRIETARY TATEMENT The Fiesta Patio Awning is a product of Carefree of Colorado, located in Broomfield, Colorado, USA. The information contained in or disclosed in this document is considered proprietary to Carefree of Colorado. Every effort has been made to ensure that the information presented in the document is accurate and complete.
  • Page 3: Component Checklist

    Carefree of Colorado Installation Manual ANUAL ATIO WNING OMPONENT HECKLIST SF002 ESCRIPTION ASIC SSEMBLY Awning Rail Roll Bar Assy Arm Assy, LH Arm Assy, RH Upper Mounting Bracket Upper Bracket Stand-off, Optional Lower Mounting Bracket Lower Bracket Shim, Optional 10 Lag Screw...
  • Page 4: Installation

    Installation Manual Carefree of Colorado ANUAL ATIO WNING NSTALLATION Fabric Width 5" 5" 6" (approx.) (at awning rail) (approx.) (approx.) Roof Line Awning Rail Upper Mounting Brake Lever Bracket (3 1/2" x 1 1/4") Door to Awning Rail Clearance: 6" Vinyl w/ Weatherguard 7"...
  • Page 5: Assembling The Awning

    The brake lever must be on the right side. For Spirit and Fiesta – The right arm assembly has the remote lock. 2. Slide the left arm into the left end plug of the roll bar. Align the holes and secure using one (1) 1/4-20 x 7/16 Quadrex Drive screw.
  • Page 6: Mounting The Awning

    Installation Manual Carefree of Colorado ANUAL ATIO WNING OUNTING THE WNING 1. Measure the distance from the awning rail to the bottom mounting brackets. Arm Latch 2. Adjust the arm length so the distance from the center of the roller to the foot is approximately equal to the measurement in step 1.
  • Page 7: Installing The Stop Bolt

    Carefree of Colorado Installation Manual ANUAL ATIO WNING Installing the Stop Bolt 1. Retract the awning. 2. Observe if the centerline of the roll bar is level with or slightly higher than the centerline of the awning rail. (Refer to page Error! Bookmark not defined..) The bottom of the roller tube must not be higher than the awning rail.
  • Page 8: Factory Installed Leds (Optional)

    Installation Manual Carefree of Colorado ANUAL ATIO WNING ACTORY NSTALLED PTIONAL PECIFICATIONS Mounting a) LED light strip is mounted in the roller tube. The power harness is concealed in the canopy hem. Options: LED light strip is mounted at the awning rail. Requires special canopy with integrated strip holder.
  • Page 9: Switch Installation

    Carefree of Colorado Installation Manual ANUAL ATIO WNING WITCH NSTALLATION A single pole switch is required for the white LED installations. NOTE: Installers may choose to furnish the control switch. The installation requires that the power line (+12VDC) be attached to a dedicated 2A circuit breaker or a 2A in-line fuse must be installed between the switch and power source.

This manual is also suitable for:

Fiesta hd

Table of Contents