How To Charge - CTEK 1055 Manual

HOW TO CHARGE

1. Connect the charger to the battery.
2. Connect the charger to the wall socket. The power lamp will indicate that the mains
cable is connected to the wall socket. The error lamp will indicate if the battery clamps
are incorrectly connected. The reverse polarity protection will ensure that the battery or
charger will not be damaged.
3. Press the MODE-button to select charging program.
4. Follow the indication lamps through the charging process.
The battery is ready to start the engine when
The battery is fully charged when
5. Stop charging at any time by disconnecting the mains cable from the wall socket.
ABSORPTION, READY TO USE
ANALYSE
BULK
DESULPHATION
SOFT START
ERROR LAMP
MODE-
MODE
BUTTON
TEMPERATURE
NORMAL SUPPLY
SENSOR
INDICATOR
POWER
NORMAL SUPPLY
LAMP
BATTERY PROGRAM
PROGRAM
is lit.
is lit.
FLOAT, FULLY CHARGED
PULSE, MAINTENANCE CHARGING
SUPPLY
RECOND
RECOND
RECOND
PROGRAM
EN • 5