Fitting The Thermal Insulation Jacket - Viessmann Vitocell 100-E Installation And Service Instructions Manual

Thermal insulation on the Vitocell without...

Fitting the thermal insulation jacket

Note
Ensure that no fleece remnants enter the heating
water buffer cylinder through the cylinder connections.
6x
2.
4.
6x
Fig.7
Note
2 people are required for the following work.
1. At the back of the cylinder: Attach 6 clip fasteners
to the edges of the right and left sections of the
thermal insulation jacket. Place the thermal insula-
tion jacket around the cylinder body.
Note
Leave the clip fasteners in the first notch.
(cont.)
6x
1.
3.
6x
2. At the front of the cylinder: Attach 6 clip fasteners to
3. Push the clip fasteners at the back of the cylinder
4. Push the clip fasteners at the front of the cylinder
the edges of the right and left sections of the ther-
mal insulation jacket.
as close together as possible.
as close together as possible.
Installation sequence
11