LAI Games HYPERshoot Operator's Manual page 16

If you have a marquee to install, please continue to step 19 below. If you are not installing a
marquee, please skip ahead to step 26.
19. Position the two cabinets next to each other and place the bracket in between, aligning the
screw to the bracket keyholes.
20. Loosen, but do not remove, all 4 screws, then push the two cabinets together.
21. Slide the bracket down, and lock it in place with the screws, tightening 2 screws on one side
first, then the 2 screws on the other side.
22. Remove 2 x M10 hex bolts at the top of the backboard, and install with the bracket shown.
23. Install another bracket below the rear frame with 2 x M6 hex bolts and nuts.
16