Volvo S80 Owner's Manual page 238

6. Wipe away any remaining sealing com-
pound, or scrape it off if it has already
hardened.
7. Insert a new air hose and check that it is
properly seated.
8. Unscrew the cap from the new sealing
compound container and check that the
seal is intact and undamaged.
9. Screw the container firmly into the re-
taining bracket.
10.Mount the bracket on the housing and
twist it counterclockwise until it clicks
into place.
11.Reinsert the casing. Check that it is
correctly in place and tighten the
screws, and press the safety catch into
position.
12.Affix the speed limit decal and a new
expiration date decal.
The empty container and used hose can be
discarded as normal refuse, or recycled.
Consult local regulations.
Replacing the container after its expira-
tion date has passed
1. Unscrew the two screws
casing.
2. Remove the speed limit sticker
the expiration date decal
3. Release the safety catch
the casing
tem unit.
4. Unscrew and remove the container.
5. Unscrew the cap from the new sealing
compound container and check that the
seal is intact and undamaged.
6. Screw the container firmly into the re-
taining bracket
7. Reinsert the casing. Check that it is
correctly in place and tighten the
screws, and press the safety catch into
position.
8. Affix the speed limit decal and a new
expiration date decal.
The empty container can be discarded as
normal refuse, or recycled. Consult local
regulations.
on the orange
and
.
06 Maintenance and specifications
and remove
from the tire sealing sys-
.
Wheels and tires
06
237