Volvo S80 Owner's Manual page 197

06 Maintenance and specifications
Replacing bulbs
High beam, Halogen
1. Remove the headlight housing from the
vehicle (see the instructions on page 194.
2. Remove the cover over the bulbs (see
page 195.
3. Pull the bulb holder out of the headlight
housing.
06
4. Pull the defective bulb out of the socket.
5. Press the new bulb into the socket until
it snaps into place. It can only be se-
cured in one position.
6. Return the bulb holder into position in
the headlight housing.
7. Put the cover back into position and
reinstall the headlight housing.
196
Parking lights
1. Remove the headlight housing from the
vehicle (see the instructions on page 194.
2. Remove the cover over the bulbs (see
page 195.
3. To access the bulb, first remove the
high beam bulb
4. Pull the wire to withdraw the bulb hold-
er.
5. Remove the burned out bulb and install
a new one. It can only be secured in one
position.
6. Press the bulb holder into the socket
and press until it clicks into place.
7. Put the cover back into position and
reinstall the headlight housing.
Turn signals
1. Remove the headlight housing from the
vehicle (see the instructions on page 194).
2. Remove the round cover by pulling the
tab until the cover comes off.
3. Pull out the holder to access the bulb.
4. Remove the burned out bulb by press-
ing it in slightly and turning out before
pulling it out. Press a new bulb into the
socket.
5. Press the bulb holder into the socket
and press until it clicks into place.
6. Press the cover until it clicks into posi-
tion.
7. Reinstall the headlight housing.